SMS05 Datasheet and Specifications PDF

This 6 pin 4 line unidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined by.

*
*
*
* Protects 3.0/3.3 up through 24 volt components Protects 4 unidirectional lines Provides electrically isolated protection SOT 23-6L Packaging
*
* PACKAGING Tape & Reel per EIA Standard 481 3,000 pieces per 7 inch reel MAXIMUM RATING S
*
*
*
* Operating Temperature: -55°C to +150°C Storage T.

The SMS series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. Each device will protect up to four lines. The.

u Transient protection for data lines to IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 24A (8/20µs) Small package for use in portable electronics Protects four I/O lines Working voltages: 5V, 12V, 15V and 24V Low leakage current Low operatin.

The SMSxx and SMSxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic Discharge (ESD). This se.

* Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV
* Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns
* Compatible with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line- Gnd) & Level 2(Line-Line)
* 350 Watts Peak Pulse P.

SMS05 TVS/ESD DIODE ARRAY AND LATCH-UP PROTECTION Features ● Ultra low leakage: nA level ● Operating voltage: 5V ● Low clamping voltage ● Complies with following standards: – IEC 61000-4-2 (ESD) imm.

* Ultra low leakage: nA level
* Operating voltage: 5V
* Low clamping voltage
* Complies with following standards:
* IEC 61000-4-2 (ESD) immunity test Air discharge: ±15kV Contact discharge: ±8kV
* IEC61000-4-4 (EFT) 40A (5/50ns)
* IEC61000-4-5 (Lightning) 12A (8/20μs)
* RoHS Compliant Dimensions SO.