SMS12C Datasheet and Specifications PDF

SMS12C TVS/ESD DIODE ARRAY AND LATCH-UP PROTECTION Features ● Ultra low leakage: nA level ● Operating voltage: 12V ● Low clamping voltage ● Complies with following standards: – IEC 61000-4-2 (ESD) i.

* Ultra low leakage: nA level
* Operating voltage: 12V
* Low clamping voltage
* Complies with following standards:
* IEC 61000-4-2 (ESD) immunity test Air discharge: ±15kV Contact discharge: ±8kV
* IEC61000-4-4 (EFT) 40A (5/50ns)
* IEC61000-4-5 (Lightning) 12A (8/20μs)
* RoHS Compliant Dimensions S.

SMS05C, SMS12C, SMS15C, SMS24C ESD Protection Diode Array, 5-Line This 5−line surge protection array is designed for application requiring transient voltage protection capability. It is intended for .

a monolithic common anode design which protects five independent lines in a single TSOP
*6 package. Features
* Protects up to 5 Lines in a Single TSOP
*6 Package
* Peak Power Dissipation
* 350 W (8 20 ms Waveform)
* ESD Rating of Class 3B (Exceeding 8.0 kV) per Human Body Model and Class C (Exceeding .

The SMS series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage-induced transient events. Each device will protect up to five lines. The.

u Transient protection for data lines to IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) 24A (8/20µs) Small package for use in portable electronics Protects five I/O lines Working voltages: 5V, 12V, 15V and 24V Low leakage current Low operatin.

This 6 pin 4 line bi-directional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined by.

*
*
*
* Protects 3.0/3.3 up through 24 volt components Protects 4 bi-directional lines Provides electrically isolated protection SOT 23-6L Packaging PACKAGING
*
* Tape & Reel per EIA Standard 481 3,000 pieces per 7 inch MAXIMUM RATINGS
*
*
*
* Operating Temperature: -55°C to +1.