| Part Number | SN75175 Datasheet |
|---|---|
| Manufacturer | Motorola Semiconductor |
| Overview |
Quad EIA-485 Line Receivers
The Motorola SN75173/175 are monolithic quad differential line receivers with three–state outputs. They are designed specifically to meet the requirements of EIA–485, EIA–4.
high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ± 200 mV over a common mode input voltage range of * 12 V to 12 V. The SN75173/175 are designed for optimum performance when used with the SN75172 or SN75174 quad differential line drivers. * Meets EIA Stan. |
SN75175 Datasheet and Specifications PDF
The SN75175 is a Quad EIA-485 Line Receivers.
Key Specifications
| Package | PDIP |
|---|---|
| Mount Type | Through Hole |
| Pins | 16 |
| Operating Voltage | 5 V |
| Max Voltage (typical range) | 5.25 V |
| Min Voltage (typical range) | 4.75 V |
| Logic Function | Receiver |
| Height | 5.08 mm |
| Part Number | SN75175 Datasheet |
|---|---|
| Description | Quadruple Differential Line Receivers |
| Manufacturer | Texas Instruments |
| Overview |
The SN65175 and SN75175 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, an.
* Meet or exceed the requirements of ANSI standard EIA/TIA-422-B, RS-423-B, and RS-485 * Meet ITU recommendations V.10, V.11, X.26, and X.27 * Designed for multipoint bus transmission on long bus lines in noisy environments * 3-state outputs * Common-mode input voltage range: *12 V to 12 V * Input s. |
| Part Number | SN75175 Datasheet |
|---|---|
| Description | QUAD EIA-485 LINE RECEIVER |
| Manufacturer | Motorola Semiconductor |
| Overview |
Order this document by SN75175/D
SN75175 Quad EIA-485 Line Receiver
The Motorola SN75175 is a monolithic quad differential line receiver with three–state outputs. It is designed specifically to meet .
high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ± 200 mV over a common mode input voltage range of *12 V to 12 V. The SN75175 is designed for optimum performance when used with the SN75172 or SN75174 quad differential line drivers. * Meets EIA Standards . |