SP332 Datasheet and Specifications PDF

The SP332 is a monolithic device that contains both RS-232 and RS-485 line drivers and receivers. The configuration of the SP332 can be changed at any time by changing the logic state of two control p.

*
* 5V only single supply operation
*
* Software programmable RS-232 or RS-485 selection
*
* 4 drivers, 4 receivers RS-232
*
* 2 drivers, 2 receivers RS-485
*
* Loop back function for self test
*
* 28-pin WSOIC package Typical Applications Circuit 0.1µF 0.1µF 0V 0V TTL/CMOS TTL/CMOS TTL/CMOS TTL/CMOS TT.

The SP332 is a monolithic device that contains both RS-232 and RS-485 line drivers and receivers. The configuration of the SP332 can be changed at any time by changing the logic state of two control .

500mV of hysteresis margin to minimize the affects of noisy tranmission lines. The inputs also have a 5kΩ resistor to ground, in an open circuit situation the input of the receiver will be forced low, committing the output to a logic high state. The input resistance will maintain 3.

The SP332 is a monolithic device that contains both RS-232 and RS-485 line drivers and receivers. The configuration of the SP332 can be changed at any time by changing the logic state of two control p.

.