SP8854E Datasheet
SP8854E Datasheet (Mitel Networks)
Mitel Networks
These pins are the data inputs to set the RF divider ratio (MN1A). High is open circuit on these pins. Data is transparent from pins to RF buffer when pin 39 (STROBE) is high and frozen in buffers whe.
s 2
*7 GHz Operating Frequency s Single 5V Supply s Low Power Consumption <1
*3W s High Comparison Frequency : 20MHz s High Gain Phase Detector : 1mA/rad s Zero ‘Dead Band’ Phase Detector s Wide Range of RF and Reference Division Ratios s Programming by Single Word Data Transfer ABSOLUTE MAXIMUM RATIN.
SP8854E Datasheet (Zarlink Semiconductor)
Zarlink Semiconductor
SP8854E These pins are the data inputs to set the RF divider ratio (MN1A). High is open circuit on these pins. Data is transparent from pins to RF buffer when pin 39 (STROBE) is high and frozen in b.
* 2
*7 GHz Operating Frequency
* Single 5V Supply
* Low Power Consumption <1
*3W
* High Comparison Frequency : 20MHz
* High Gain Phase Detector : 1mA/rad
* Zero ‘Dead Band’ Phase Detector
* Wide Range of RF and Reference Division Ratios
* Programming by Single Word Data Transfer Absolute Maximum Ratin.