Analog Power Datasheet | Pinout, Features, Price Comparison & PDF

LM385/LM385B Adjustable Micropower Voltage Reference n FEATURES l Adjustable from 1.24V to 5.3V. l Operating Current from 10µA to 20mA. l Low Temper

LM385/LM385B Adjustable Micropower Voltage Reference n FEATURES l Adjustable from 1.24V to 5.3V. l Operating Current from 10µA to 20mA. l Low Temper

Advanced Analog Technology, Inc. September 2016 AAT1267B Product information presented is for internal use within AAT Inc. only. Details are subjec

Advanced Analog Technology, Inc. November 2012 AAT1176B Product information presented is for internal use within AAT Inc. only. Details are subject

PAM8403 Filterless 3W Class-D Stereo Audio Amplifier Key Features n 3W Output at 10% THD with a 4Ω Load and 5V Power Supply n Filterless, Low Quiesce

PAM8610 10W Stereo Class-D Audio Power Amplifier with DC Volume Control Key Features www.datasheet4u.com Load at General Description The PAM8610 is

a FEATURES Low Cost High Speed 50 MHz Unity Gain Bandwidth 350 V/␮s Slew Rate 45 ns Settling Time to 0.1% (10 V Step) Flexible Power Supply Specified

PAM8302A 2.5W Filterless Class-D Mono Audio Amplifier Key Features www.datasheet4u.com and 5V General Description The PAM8302A is a 2.5W class-D mono

TAS5630 www.ti.com SLES220B – JUNE 2009 – REVISED FEBRUARY 2010 300-W STEREO / 600-W MONO PurePath™ HD ANALOG-INPUT POWER STAGE Check for Samples:

a Dual, Low Power Video Op Amp AD828 FEATURES Excellent Video Performance Differential Gain and Phase Error of 0.01% and 0.05؇ High Speed 130 MHz 3

PAM8301 Filterless Class-D Mono Audio Amplifier Key Features www.datasheet4u.com and 5V General Description The PAM8301 is a 1.5W class-D mono audio

1W High Power White LED Driver PAM2801 Features n LED Power Efficiency: up to 90% n LED Current Accuracy: ± 3%(V IN=3.2V to 1.1 V @V F=3.4V) n Low S

a High Speed, Low Power Dual Op Amp FEATURES High Speed 50 MHz Unity Gain Stable Operation 300 V/ms Slew Rate 120 ns Settling Time Drives Unlimited

Features nSimple low parts count nInternal 40V NDMOS switch n2A output current nSingle pin on/off and brightness control Using DC voltage or PWM nSoft

TAS5611A www.ti.com SLAS709B – JUNE 2010 – REVISED JULY 2011 125W STEREO/250W MONO PurePath™ HD ANALOG-INPUT POWER STAGE Check for Samples: TAS561

Data Sheet ADIN1100 Robust, Industrial, Low Power 10BASE-T1L PHY FEATURES ► 10BASE-T1L IEEE Standard 802.3cg-2019 compliant ► Cable reach up to 1700

FEATURES Meets EIA RS-485 standard 5 Mbps data rate Single 5 V supply –7 V to +12 V bus common-mode range High speed, low power BiCMOS Thermal shutdow

Data Sheet LTC4287 High Power Positive Hot Swap Controller with Power Monitor FEATURES ► Drives two gates for high power applications ► Wide input su

AU6815P DSP 2×32W Class D 1. • - 2.0: 2×25W (8Ω, 21V, THD + N = 1%) - 2.0: 2×32W (6Ω, 24V, THD + N = 1%) • - PVDD: 4.5V – 26.4V - DVDD: 1.8V

Analog Power P-Channel 30-V (D-S) MOSFET Key Features: • Low rDS(on) trench technology • Low thermal impedance • Fast switching speed Typical Applicat