http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





APPLIED POWER SYSTEMS
APPLIED POWER SYSTEMS

IAP200B120 Datasheet Preview

IAP200B120 Datasheet

200A / 1200V Full-Bridge IGBT Inverter

No Preview Available !

IAP200B120 pdf
APPLIED
POWER
SYSTEMS,
INC.
IAP200B120 SixPac™
200A / 1200V Full-Bridge IGBT Inverter
FEATURES INCLUDE
Multi-Function Power Assembly
Compact Size – 9” H X 17.60” W X 11.00” D
DC Bus Voltages to 850VDC
Snubber-less operation to 650VDC
Switching frequencies to over 20kHz
Protective circuitry with fail-safe opto-isolated fault annunciation,
including:
Over current
Short circuit
Over voltage
P.S. undervoltage
Over Temperature
Opto-isolated or fiber-optic gate drive and fault signal output for
electrical isolation and noise immunity
Integrated cooling with temperature sensors and feedback
Many options
Configurable Power
The SixPacis a flexible, highly integrated IGBT
based power assembly with a wide range of
applications. These include inverters for motor
controls, switch mode power supplies (SMPS),
UPS, welders, etc. The SixPaccan be operated
at frequencies to over 20kHz. The SixPaccan be
configured as a full bridge or three-phase bridge
inverter mounted on an air-cooled or liquid-cooled
heat sink. Configurations include options for (full,
half or no control) converter input circuitry, inverter
output circuitry, cooling and a wide variety of
drivers and safety features for the converter front
end and IGBT inverter output stage.
To operate at high switching frequencies, the
SixPacutilizes a low inductance laminated bus
structure, optically isolated or fiber optically
coupled gate drive interfaces, isolated gate power
supplies and a DC-link capacitor bank.
The SixPacprovides built in protection features
including: over voltage, under voltage lockout, over
current, over temperature, short circuit and optional
airflow or liquid flow indicators.
Flexibility is a key feature of the SixPac. Options
include: a choice of converter front ends, rectifier,
half or full SCR control, with or without SCR gate
firing boards and soft-start circuitry. A choice of
cooling methods, forced air or liquid is also
available. Customer provided PWM is optically
coupled or a fiber optic link can be provided to the
IGBT interface. Current feedback is provided by
Hall effect transducers.
The SixPacis rated to maximum input voltages
up to 850 VDC, switching frequencies to over
20kHz, includes many safety features to protect
the IGBTs and output circuitry and can be
configured to meet your application.
Schematic:
124 Charlotte Avenue Hicksville, NY 11801 Ph: 516.935.2230 Fax: 516.935.2603 Website: www.appliedps.com
Page 1 of 6
Rev. 120706-01



APPLIED POWER SYSTEMS
APPLIED POWER SYSTEMS

IAP200B120 Datasheet Preview

IAP200B120 Datasheet

200A / 1200V Full-Bridge IGBT Inverter

No Preview Available !

IAP200B120 pdf
APPLIED
POWER
SYSTEMS,
INC.
SixPac™ IAP200B120
IAP200B120 SixPac™
200A / 1200V Full-Bridge IGBT Inverter
Absolute Maximum Ratings TJ=25 C unless otherwise specified
General
Symbol
IGBT Junction Temperature
TJ
Storage Temperature
TSTG
Voltage applied to DC terminals
VCC
Isolation voltage, AC 1 minute, 60Hz sinusoidal
IGBT Inverter
VISO
Collector Current (TC=25 C)
IC
Peak Collector Current (TJ<150 C)
ICM
Emitter Current
Peak Emitter Current
Maximum Collector Dissipation (TJ<150 C)
IE
IEM
PCD
Gate Drive Board
Unregulated +24V Power Supply
Regulated +15V Power Supply
PWM Signal Input Voltage
Fault Output Supply Voltage
Fault Output Current
Value
-40 to +150
-40 to +125
850
2500
200
400
200
400
890
30
18
20
30
50
Units
C
C
Volts
Volts
Amperes
Amperes
Amperes
Amperes
Watts
Volts
Volts
Volts
Volts
mA
IGBT Inverter Electrical Characteristics, TJ=25 C unless otherwise specified
Parameter
Symbol
Test Conditions Min
Collector Cutoff Current
ICES
VCE=VCES, VGE=0V
-
Collector-Emitter Saturation Voltage
VCE(sat)
IC=200A, TJ=25 C
IC=200A, TJ=125 C
-
-
Emitter-Collector Voltage
VEC
IE=200A
-
td(on)
-
Inductive Load Switching Times
Diode Reverse Recovery Time
tr
td(off)
tr
Trr
VCC=600V
IC=200A
VGE=15V
RG=1.6Ω
-
-
-
-
Diode Reverse Recovery Charge
Qrr
-
DC Link Capacitance
-
Typ
-
1.8
1.9
-
-
-
-
-
-
12.2
4950
Max
1
2.4
-
3.2
300
80
500
300
200
-
-
Units
mA
Volts
Volts
Volts
ηs
ηs
ηs
ηs
ηs
µC
µF
Thermal and Mechanical Parameters
Parameter
IGBT Thermal Resistance, Junction to Case
FWD Thermal Resistance, Junction to Case
Heatsink Thermal Resistance
Mounting Torque, AC terminals
Mounting Torque, DC terminals
Mounting Torque, case mounting
Weight
Symbol
RΘ(j-c)
RΘ(j-c)
RΘ(s-a)
Test Conditions Min Typ Max Units
Per IGBT ½ module - 0.08 0.15 °C/W
Per FWD ½ module -
- 0.18 °C/W
1500 LFM airflow - .045 - °C/W
- 75 90 In-lb
- 130 150 In-lb
- 130 150 In-lb
- 21 -
lb
124 Charlotte Avenue Hicksville, NY 11801 Ph: 516.935.2230 Fax: 516.935.2603 Website: www.appliedps.com
Page 2 of 6
Rev. 120706-01


Part Number IAP200B120
Description 200A / 1200V Full-Bridge IGBT Inverter
Maker APPLIED POWER SYSTEMS
Total Page 6 Pages
PDF Download
IAP200B120 pdf
Download PDF File


Buy Electronic Components




Related Datasheet

1 IAP200B120 200A / 1200V Full-Bridge IGBT Inverter APPLIED POWER SYSTEMS
APPLIED POWER SYSTEMS
IAP200B120 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components