http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





AVAGO
AVAGO

IAM-91563 Datasheet Preview

IAM-91563 Datasheet

3V Downconverter

No Preview Available !

IAM-91563 pdf
IAM-91563
0.8–6 GHz 3V Downconverter
Data Sheet
Description
Avago’s IAM-91563 is an economical 3V GaAs MMIC mixer
used for frequency down-conversion. RF frequency cover-
age is from 0.8 to 6 GHz and IF ­coverage is from 50 to 700
MHz. Packaged in the SOT-363 ­package, this 4.0 sq. mm.
package requires half the board space of a SOT-143 and
only 15% the board space of an SO‑8 package.
At 1.9 GHz, the IAM-91563 ­ provides 9 dB of conversion
gain, thus eliminating an RF or IF gain stage normally
needed with a lossy mixer. LO drive power is nominally
only -5 dBm, eliminating an LO buffer amplifier. The 8.5 dB
noise figure is low enough to allow the system to use a
low cost LNA. The
system linearity for
-m6 odsBt mcomInmpuetrcIiPa3l ­
provides adequate
applications, but is
adjustable to 0 dBm.
The circuit uses GaAs PHEMT technology with proven reli-
ability, and uniformity. The MMIC ­consists of a cascode FET
structure that provides unbalanced gm modulation type
mixing. An on-chip LO buffer amp drives the mixer while
bias circuitry allows a single +3V supply (through a choked
IF port). The LO port is internally matched to 50 Ω. The
RF and IF ports are high impedance and require external
matching networks.
Surface Mount Package: SOT-363 (SC-70)
Pin Connections and Package Marking
MGA-86563 Pkg
LO 1
6 IF and Vd
GND 2
5 GND
RF 3
4 SOURCE
BYPASS
Note:
1. Package marking provides orientation and identification.
Features
Lead-free Option Available
+0 dBm Input IP3 at 1.9 GHz
Single +3V Supply
8.5 dB SSB Noise Figure at 1.9 GHz
9.0 dB Conversion Gain at 1.9 GHz
Ultra-miniature Package
Applications
Downconverter for PCS, PHS, ISM, WLL, and other
Wireless Applications
Attention: Observe precautions for
handling electrostatic ­sensitive devices.
ESD Human Body Model (Class 0)
Refer to Avago Application Note A004R:
Electrostatic Discharge Damage and Control.
Simplified Schematic
LO
1
RF
3
IF and Vd
6
SOURCE
BYPASS
4
GROUND
2, 5




AVAGO
AVAGO

IAM-91563 Datasheet Preview

IAM-91563 Datasheet

3V Downconverter

No Preview Available !

IAM-91563 pdf
IAM-91563 Absolute Maximum Ratings
Symbol Parameter
Units
Absolute
Maximum[1]
Vd
VRF, VLO
Pin
Tch
TSTG
Device Voltage, RF output to ground
RF voltage or LO voltage to ground
CW RF Input Power
Channel Temperature
Storage Temperature
V 6.0
V +0.5, -1.0
dBm
+13
°C 150
°C -65 to 150
Thermal Resistance [2]: θch-c = 310°C/W
Notes:
1. Permanent damage may occur if any of
these limits are exceeded.
2. TC = 25°C (TC is defined to be the
temperature at the package pins where
contact is made to the circuit board).
IAM-91563 Electrical Specifications, TC = 25°C, Vd = 3 V
Symbol Parameters and Test Conditions
Units Min. Typ. Max. Std Dev[2]
G test
Gain in test circuit[1]
RF=1890 MHz, IF=250 MHz dB 4.0 9.0
NFtest Noise Figure in test circuit[1]
RF=1890 MHz, IF=250 MHz dB 8.5 11.0
Id Device Current mA 6.0 9.0 12.0
NF Noise Figure (RF & IF with external matching,
f = 0.9 GHz dB 7.0
IF=250 MHz, LO power=-5 dBm)
f = 1.9 GHz 8.5
f = 2.4 GHz 11.0
f = 4.0 GHz 16.5
f = 6.0 GHz 18.0
0.5
Gc Conversion gain (RF and IF with external matching,
IF=250 MHz, LO power=-5 dBm)
f = 0.9 GHz dB 11.0
f = 1.9 GHz 9.0 1.5
f = 2.4 GHz 7.7
f = 4.0 GHz 4.6
f = 6.0 GHz 1.7
P1 dB Output power @ 1 dB compression (RF and IF with
external matching, IF=250 MHz, LO power =-5 dBm)
f = 0.9 GHz dBm
f = 1.9 GHz
f = 2.4 GHz
f = 4.0 GHz
f = 6.0 GHz
-6.7
-8.0 1.3
-8.7
-15.0
-17.8
RLRF RF port return loss
f = 0.5 - 6.0 GHz dB -1.7
0.2
RLLO LO port return loss
f = 0.5 - 6.0 GHz dB -9.4
0.3
RLIF IF port return loss
f = 50 - 700 MHz dB -3.7
0.2
IP3 Input Third Order Intercept Point
RF = 1.9 GHz, IF = 250 MHz dBm -6.0 1.3
Id = 9.0 mA, LO power = -5 dBm
IP3 Input Third Order Intercept Point
RF = 1.9 GHz, IF = 250 MHz dBm
0 1.1
Id = 15 mA, LO power = -2 dBm
ISOLL-R LO-RF Isolation
RF = 1.9 GHz dB 18
ISOLR-I RF-IF Isolation (No Match) dB 2
ISOLR-I LO-IF Isolation (No Match) dB
4
Notes:
1. Guaranteed specifications are 100% tested in the circuit in Figure 18 in the Applications Information section.
2. Standard deviation number is based on measurement of at least 500 parts from three non-consecutive wafer lots during the initial characterization
of this product, and is intended to be used as an estimate for distribution of the typical specification.



Part Number IAM-91563
Description 3V Downconverter
Maker AVAGO
Total Page 14 Pages
PDF Download
IAM-91563 pdf
Download PDF File


Buy Electronic Components




Related Datasheet

1 IAM-91563 3V Downconverter AVAGO
AVAGO
IAM-91563 pdf
2 IAM-91563 0.8-6 GHz 3V Downconverter Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
IAM-91563 pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components