http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





Advanced Semiconductor
Advanced Semiconductor

ALN0902AT Datasheet Preview

ALN0902AT Datasheet

Internally Matched LNA Module

No Preview Available !

ALN0902AT pdf
www.DataSheet4U.com
plerowTM ALN0902AT
Internally Matched LNA Module
Features
· S21 = 22.2 dB @ 890 MHz
= 21.8 dB @ 915 MHz
· NF of 1.0 dB over Frequency
· Unconditionally Stable
· Single 5V Supply
· High OIP3 @ Low Current
Description
The plerowTM ALN-series is the compactly designed surface-mount
module for the use of the LNA with or without the following gain blocks in
the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS,
PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communi-
cation terminals, CATV and so on. It has an exceptional performance of
low noise figure, high gain, high OIP3, and low bias current. The stability
factor is always kept more than unity over the application band in order
to ensure its unconditionally stable implementation to the application
system environment. The surface-mount module package including the
completed matching circuit and other components necessary just in case
allows very simple and convenient implementation onto the system
board in mass production level.
Specifications (in Production)
Typ. @ T = 25°C, Vs = 5 V, Freq. = 902.5 MHz, Zo.sys = 50 ohm
Parameter
Unit Specifications
Min Typ Max
Frequency Range
MHz
890
915
Gain
dB 21 22
Gain Flatness
dB
± 0.2
± 0.3
Noise Figure (NF)
dB
1.0 1.05
Output IP3 (1)
dBm 29 30
S11 / S22 (2)
dB
-14 / -14
Output P1dB
dBm 16 17
Switching Time
µsec
-
Supply Current
mA
60 80
Supply Voltage
V
5
Impedance
50
Max. RF Input Power
dBm
C.W 29 ~ 31 (before fail)
Package Type & Size
mm Surface Mount Type, 10Wx10Lx3.8H
Operating temperature is -40°C to +85°C.
1) OIP3 is measured with two tones at an output power of 0 dBm / tone separated by 1 MHz.
2) S11/S22 (max) is the worst value within the frequency band.
3) Switching time means the time that takes for output power to get stabilized to its final level after switching DC voltage from 0 V to VS.
1-stage Single Type
More Information
Website: www.asb.co.kr
E-mail: sales@asb.co.kr
Tel: (82) 42-528-7223
Fax: (82) 42-528-7222
ASB Inc., 4th Fl. Venture Town
Bldg., 367-17 Goijeong-Dong,
Seo-Gu, Daejon 302-716, Korea
Outline Drawing (Unit: mm)
plerow
ALN0902AT
ASB Inc.
(Top View)
Solder Stencil Area
(Bottom View)
(Side View)
Pin Number
2
5
6
Others
Function
RF In
RF Out
+Vcc
Ground
Note: 1. The number and size of ground via holes in
a circuit board is critical for thermal RF
grounding considerations.
2. We recommend that the ground via holes be
placed on the bottom of all ground pins for
better RF and thermal performance, as
shown in the drawing at the left side.
Ø0.4 plated thru holes to ground plane
1/3
(Recommended Footprint)
www.asb.co.kr
November 2008



Advanced Semiconductor
Advanced Semiconductor

ALN0902AT Datasheet Preview

ALN0902AT Datasheet

Internally Matched LNA Module

No Preview Available !

ALN0902AT pdf
www.DataSheet4U.com
Typical Performance
(Measured)
890~915
+5 V
Stability Factor (K)
plerowTM ALN0902AT
Internally Matched LNA Module
S-parameters
Noise Figure
OIP3
P1dB
2/3
www.asb.co.kr
November 2008


Part Number ALN0902AT
Description Internally Matched LNA Module
Maker Advanced Semiconductor
Total Page 3 Pages
PDF Download
ALN0902AT pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 ALN0902AT Internally Matched LNA Module Advanced Semiconductor
Advanced Semiconductor
ALN0902AT pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components