http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





Emerson
Emerson

SXE15-48S12-RJ Datasheet Preview

SXE15-48S12-RJ Datasheet

DC-DC / Low Power Isolated Industrial

No Preview Available !

SXE15-48S12-RJ pdf
SXE15 Series
Single output
DC-DC CONVERTERS 10.8-15 W High Efficiency DC-DC Converters
High efficiency topology, 87% typical at 5 V
Wide operating temperature, up to and exceeding 70 ˚C
(natural convection)
90% to 110% output trim
No minimum load
Overvoltage protection
Remote ON/OFF control
Available RoHS compliant
1
The SXE15 is a new high efficiency open frame isolated 15 Watt converter series in
an industry standard footprint. All models in the series feature an input voltage range
of 33 Vdc to 75 Vdc and are available in output voltages of 12 V, 5 V, 3.3 V, 2.5 V
and 1.8 V. The output voltage on each model is adjustable from 90% to 110% of the
nominal value. Typical efficiencies for the models are 87% for the 5 V, 86% for the
3.3 V, 85% for the 2.5 V and 12 V and 83% for the 1.8 V version. The SXE15 series
also has a remote ON/OFF capability with active high or active low logic.
Overcurrent and overvoltage protection features are included as standard. With full
international safety approval including EN60950 and cUL1950, the SXE15 reduces
compliance costs and time to market.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
TÜV
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS
Voltage adjustability
90% to 110%
Total error band
(See Note 13)
±4% max.
Line regulation
Low line to high line
1.8 V and 2.5 V models
3.3 V and 5 V models
0.5% max.
0.1% max.
Load regulation
Full load to min. load
1.8 V model
2.5 V model
3.3 V and 5 V models
2.0% max.
1.5% max.
0.5% max.
Minimum load
(See Note 12)
0%
Overshoot
1.8 V and 2.5 V models
At turn-on and turn-off 3.3 V and 5 V models
4% max.
None
Undershoot
None
Ripple and noise
(See Note 1)
5 Hz to 20 MHz
1.8 V and 2.5 V models
3.3 V and 5 V models
40 mV pk-pk
14 mV rms
70 mV pk-p
20 mV rms
Transient response
(See Note 2)
Typical deviation
1.8 V and 2.5 V models
150 mV
3.3 V and 5 V models
100 mV
400 µs recovery to
within total error band
INPUT SPECIFICATIONS
Input voltage range
48 Vin nominal
33-75 Vdc
Input current
No load
Remote OFF
35 mA max.
25 mA max.
Input current (max.)
(See Note 4)
0.55 A max. @ Io max.
and Vin = 33-75 Vdc
Input reflected ripple
(See Note 6)
5 mA (pk-pk) typ.
Active high remote ON/OFF
Logic compatibility
ON
OFF
(See Note 8)
Open collector ref to -input
Open circuit or >2 Vdc
<1.2 Vdc
Undervoltage lockout
Power up
Power down
33 V (typ.)
30 V (typ.)
Start-up time
(See Note 7)
Power up
Remote ON/OFF
1.5 ms (typ.)
2.5 ms (typ.)
EMC CHARACTERISTICS
Conducted emissions EN55022 (See Note 3)
Level A
EN55022 (See Note 3)
Level B
Radiated emissions EN55022 (See Longform Datasheet) Level B
Immunity:
ESD air
EN61000-4-2 8 kV, 15 kV
ESD contact
EN61000-4-2 6 kV, 8 kV
Radiated field enclosure EN61000-4-3 10 V/m
Conducted (dc power) EN61000-4-6 10 V
Conducted (signal)
EN61000-4-6 10 V
(See Note 11)
Input transients
ETS 300 132-2, ETR 283
GENERAL SPECIFICATIONS
Efficiency
See table
Operational insulation Input/output
1500 Vdc
Switching frequency Fixed
265 kHz typ.
Approvals and
standards
(See Notes 5)
UL/cUL1950, EN60950
TÜV Rheinland
Material flammability
UL94V-0
Weight
12 g (0.42 oz)
Coplanarity
150 µm
MTBF
Representative model:
MIL-HDBK-217F
1,790,000 hours
48S05J @ 48 Vin, 40 °C,
100% load ground benign
BELLCORE 332
>1,500,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance
(See Note 9)
Operating ambient
temp. (3.3 V and 5 V)
Operating ambient
temp. (1.8 V, 2.5 V
and 12 V)
Non-operating
(All models)
-40 °C to +65 °C
-40 °C to +70 °C
-40 °C to +120 °C
File Name: sxe15s.pdf Rev (02): 08 Dec 2005



Emerson
Emerson

SXE15-48S12-RJ Datasheet Preview

SXE15-48S12-RJ Datasheet

DC-DC / Low Power Isolated Industrial

No Preview Available !

SXE15-48S12-RJ pdf
SXE15 Series
Single output
DC-DC CONVERTERS 10.8-15 W High Efficiency DC-DC Converters
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
OUTPUT
POWER
(MAX.)
10.8 W
15 W
15 W
15 W
15 W
INPUT
VOLTAGE
33-75 Vdc
33-75 Vdc
33-75 Vdc
33-75 Vdc
33-75 Vdc
OVP
OUTPUT
VOLTAGE
2.3 Vdc
3.2 Vdc
4 Vdc
6 Vdc
15 Vdc (10)
1.8 V
2.5 V
3.3 V
5V
12 V
OUTPUT
CURRENT
(MIN.)
0A
0A
0A
0A
0A
OUTPUT
CURRENT
(MAX.)
6A
6A
4.5 A
3A
1.25 A
EFFICIENCY
(TYP.)
83%
85%
86%
87%
85%
REGULATION
LINE LOAD
0.3%
0.3%
0.1%
0.1%
0.1%
2.0%
1.5%
0.5%
0.5%
0.5%
MODEL
NUMBER (8,14,15)
SXE15-48S1V8J
SXE15-48S2V5J
SXE15-48S3V3J
SXE15-48S05J
SXE15-48S12J
Notes
1 Measured as per recommended set-up. See Application Note 116 for details.
2 di/dt = 0.1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to
0.75 lo max. and 0.75 lo max. to 0.5 lo max.
3 The SXE15 meets level A and level B conducted emissions only with
external components connected before the input pins to the converter.
See Application Note 116 for details.
4 Recommended input fusing is a 2 A HRC 200 V rated fuse.
5 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
6 Measured with external Pi filter. See Application Note 116 for further details.
7 Start-up into resistive load.
8 Active low remote on/off is available. Standard product is active high.
Designate with the Suffix ‘-R’ e.g. SXE15-48S05-RJ.
9 Operating ambient temperatures are specified at natural convection.
Higher operating temperatures are possible with increased airflow.
See Application Note 116 for further details.
10 SXE15-48S12J below 0.2 A loading. OVP is TVS and 17 V typical.
11 Signal line assumed < 3 m in length.
12 A 5% minimum load is required to maintain the output voltage regulation
over all operating conditions for the SXE15-48S12J.
13 This parameter is calculated at worst case line, load,
temperature and initial settings.
14 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
15 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
PROTECTION
Short circuit
Overvoltage
TELECOM SPECIFICATION
Central office interface A
Continuous
Latching clamp
ETS300-132-2, input voltage
and current requirements
CAUTION: Hazardous internal voltages and high temperatures.
Ensure that unit is not user accessible.
International Safety Standard Approvals
UL/cUL 1950 3rd edition. File No. E135734
TÜV
TÜV Rheinland. File No. 10401-3336-35841. Licence No. 40004290
1.905 (48.39)
overall length
TOP VIEW
1.150 (29.21)
1.390 (35.31)
0.070 (1.78) MAX
SIDE VIEW
1.885 (47.88)
leadframe length
1.812 (46.03)
BOTTOM VIEW
0.477 (12.11)
1.812 (46.02)
0.069 (1.74)
0.197 (5.00)
0.394 (10.01)
1.181 (30.00)
1.378 (35.00)
1.575 (40.01)
0.010 (0.25) MIN
0.335 (8.51) MAX
0.047 (1.18)
ø.050 (ø1.27)
Non-Skid Retaining Pins,
2 Places
0.100 (2.54)
12 places
Tolerence: ±.015 (±.38)
Recommended Land & Hole Pattern
1.575 (40.01)
0.197 (5.00)
0.394 (10.01)
ø0.063 (ø1.60)
0.502 (12.75)
1.812 (46.02)
0.125 (3.18)
1
0.063 (1.60)
1.200 (30.48)
0.161 (4.09)
0.053 (1.36)
0.130 (3.30)
1.181 (30.00)
1.378 (35.00)
All Dimensions in Inches [mm]
PIN CONNECTIONS
PIN NUMBER
FEATURE
1 Vout +
2 Vout -
3 N/C
4 Trim
5 N/C
6 N/C
7 N/C
8 On/Off
9 N/C
10 N/C
11 Vin -
12 Vin +
Datasheet © Artesyn Technologies® 2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items:  Application Note  Longform Data Sheet
www.artesyn.com
File Name: sxe15s.pdf Rev (02): 08 Dec 2005


Part Number SXE15-48S12-RJ
Description DC-DC / Low Power Isolated Industrial
Maker Emerson
Total Page 2 Pages
PDF Download
SXE15-48S12-RJ pdf
Download PDF File
[partsNo] view html
View PDF for Mobile






Related Datasheet

1 SXE15-48S12-RJ DC-DC / Low Power Isolated Industrial Emerson
Emerson
SXE15-48S12-RJ pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components