http://www.datasheet4u.com

900,000+ Datasheet PDF Search and Download

Datasheet4U offers most rated semiconductors datasheets pdf





VTI technologies
VTI technologies

SCA1000 Datasheet Preview

SCA1000 Datasheet

(SCA1000 / SCA1020) Accelerometer

No Preview Available !

SCA1000 pdf
Preliminary
SCA1000 and SCA1020 Series
Accelerometer
FEATURES
• 2-axis measurement: SCA1000 for X - Y measurement and
SCA1020 for Z - Y measurement
• Available range ±1.7 g
• Interchangeable with SCA610/SCA620 (see interchangeability
drawing below)
• Over damped sensing element to control frequency response
• SMD DIL-12 lead-free component
• Compatible with lead-free reflow soldering process
• Advanced internal and external connection failure detection
• Digitally activated electrostatic self-test
• Continuous memory parity check
• Single +5 V supply; two ratiometric analog voltage outputs
• Serial Peripheral Interface (SPI) compatible digital output (11 bits)
• Internal temperature sensor, accessible via SPI
BENEFITS
• Excellent reliability and stability over time and
temperature
• High resolution and low noise
• Wide operating temperature range
• Outstanding overload and shock durability
APPLICATIONS
• 2-axis acceleration measurements
• 2-axis platform leveling
• Inclination based position measurement
• 360 ° vertical orientation measurement
For customized product, please contact VTI Technologies
ELECTRICAL CHARACTERISTICS
Parameter
Supply voltage Vdd (1
Current consumption
Analog resistive output load
Analog capacitive output load
Digital output load
SPI clock frequency
AD conversion time
Data transfer time
Condition
Vdd = 5 V; No load
Vout to Vdd or Vss
@ 500 kHz
@500 kHz clock
Min
4.75
10
Typ.
5.0
150
38
Max
5.25
5
20
1
500
Units
V
mA
kOhm
nF
nF
kHz
µs
µs
PERFORMANCE CHARACTERISTICS
Parameter
Condition
Measuring range (2
Nominal
Measuring direction relative to
mounting plane (12
Zero point (3,12
Sensitivity (4,12
Zero point error over temperature (5
See note 12.
Mounting position
@ room temperature
-25…85 °C typical
Sensitivity error over temperature (6
-40…125 °C
-25…85 °C typical
Typical non-linearity (7
Cross-axis sensitivity (10
Frequency response –3dB (8
Ratiometric error (9
Output noise density (11
-40…125 °C
Over measuring range
@ room temperature
@ -40…125 °C
Vdd = 4.75...5.25 V
From DC...100 Hz
Digital output resolution
FS
VDD = 5.00V, UNLESS OTHERWISE SPECIFIED
SCA1000-D01 SCA1020-D02
±1.7
“X”= parellel
“Y” =parallel
Vdd/2
1.2
±70
±100
±3
±4
±20
3.5
±1.7
“Z”= perpendicular
“Y”= parallel
Vdd/2
1.2
±70
±100
±3
±4
±20
3.5
50±30 Hz
2
50±30 Hz
2
80 80
11 11
Units
g
V
V/g
mg
mg
%
%
mg
%
Hz
%
µg/ Hz
Bits
Note 1
Note 2
Note 3
Note 4
Note 5
Note 6
Note 7
Note 8
100 nF supply by-pass capacitor is needed.
Measuring directions in parallel to mounting plane, arrows showing positive acceleration
direction.
Zero point specified as Voffset = Vout(0 g) [ V ]. See note 12.
Sensitivity specified as Vsens = {Vout(+1 g) - Vout(-1 g)}/2 [ V/g ]. See note 12.
Zero point error specified as Zero point error = {Vout(0 g) – Vdd/2} / Vsens [ g ] VSens =
Nominal sensitivity Vdd/2 = Nominal offset.
Sensitivity error specified as Sensitivity error = { [Vout(+1 g)-Vout(-1 g)] / 2 - Vsens_nom} /
Vsens_nom x 100 % [% ] Vsens_nom = nominal sensitivity See note 12.
From straight line through +1 g and -1 g points.
The output has true DC (0 Hz) response.
Note 9
Vout(@Vx) x 5.00V
The ratiometric error is specified as: RE = 100% x 1-
Vx
Vout(@5V)
Note 10
Note 11
Note 12
The cross-axis sensitivity determines how much acceleration, perpendicular to the measuring
axis, couples to the output. The total crossaxis sensitivity is the geometric sum of the
sensitivities of the two axis which are perpendicular to the measuring axis. The angular
alignment error between channels 1 and 2 is included into the cross axis error.
Typical figure. In addition, supply voltage noise couples to the output due to the
ratiometric nature of the accelerometer.
Measuring directions.
Rev. 18 Jan 2005
VTI Technologies reserves the right to modify this specification without prior to notice.
Free Datasheet http://www.datasheet4u.com/



VTI technologies
VTI technologies

SCA1000 Datasheet Preview

SCA1000 Datasheet

(SCA1000 / SCA1020) Accelerometer

No Preview Available !

SCA1000 pdf
MEASURING DIRECTIONS
SCA1000 ( X - Y Configuration)
SCA1000 and SCA1020 Series
SCA1020 ( Z - Y Configuration)
X: +1 g Position
Y: 0 g Position
X: 0 g Position
Y: 0 g Position
X: -1 g Position
Y: 0 g Position
Z: +1 g Position
Y: 0 g Position
Z: 0 g Position
Y: 0 g Position
Z: -1 g Position
Y: 0 g Position
X: 0 g Position
Y: +1 g Position
X: 0 g Position
Y: 0 g Position
X: 0 g Position
Y: -1 g Position
ABSOLUTE MAXIMUM RATINGS
Parameter
Value
Acceleration (powered or non powered)
Supply voltage
Voltage at input/output pins
Storage temperature range
20 000
-0.3 V to +5.5 V
-0.3 V to (Vdd+0.3 V)
-55…125
Unit
g
V
V
°C
Z: 0 g Position
Y: +1 g Position
Z: 0 g Position
Y: 0 g Position
Z: 0 g Position
Y: -1 g Position
DIMENSIONS
The accelerometer weighs < 1.2 g.
The size of the part is approximately (w x h x l) 9 x 5 x 16 mm. Pin pitch is standard 100 mils.
PCB PAD LAYOUTS
SENSING DIRECTION
PART NUMBER
SERIAL NUMBER
Acceleration in the direction of the arrow
will increase the output voltage.
Free Datasheet http://www.datasheet4u.com/


Part Number SCA1000
Description (SCA1000 / SCA1020) Accelerometer
Maker VTI technologies
Total Page 3 Pages
PDF Download
SCA1000 pdf
Download PDF File


Buy Electronic Components




Related Datasheet

1 SCA1000 (SCA1000 / SCA1020) Accelerometer VTI technologies
VTI technologies
SCA1000 pdf
2 SCA100T Inclinometer VTI technologies
VTI technologies
SCA100T pdf
3 SCA100T DUAL AXIS INCLINOMETER Murata
Murata
SCA100T pdf






Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

site map

webmaste! click here

contact us

Buy Components