Datasheet4U Logo Datasheet4U.com

TP2414 - Low Noise CMOS RRIO Op-amps

Download the TP2414 datasheet PDF. This datasheet also covers the TP2411 variant, as both devices belong to the same low noise cmos rrio op-amps family and are provided as variant models within a single manufacturer datasheet.

General Description

The TP2411, TP2412, and TP2414 are low-cost, single, dual, and quad rail-to-rail output, singlesupply amplifiers featuring low offset and input voltages, low-current noise, and wide signal bandwidth.

Key Features

  • Gain-bandwidth Product: 10 MHz.
  • Low Noise: 8.2 nV/√Hz(f= 1 kHz).
  • Slew Rate: 7 V/μs.
  • Offset Voltage: 1 mV (max).
  • EMIRR IN+: 88 dB( under 2.4 GHz).
  • Low THD+N: 0.0005%.
  • Supply Range: 2.2 V to 5.5 V.
  • Supply Current: 1.4 mA/ch.
  • Low Input Bias Current: 0.3 pA Typical.
  • Rail-to-Rail I/O.
  • High Output Current: 70 mA (1.0 V Drop).

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TP2411-3PEAK.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number TP2414
Manufacturer 3PEAK
File Size 1.10 MB
Description Low Noise CMOS RRIO Op-amps
Datasheet download datasheet TP2414 Datasheet

Full PDF Text Transcription for TP2414 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for TP2414. For precise diagrams, and layout, please refer to the original PDF.

TP2411/TP2412/TP2414 Low Cost, Low Noise CMOS RRIO Op Amps Features  Gain-bandwidth Product: 10 MHz  Low Noise: 8.2 nV/√Hz(f= 1 kHz)  Slew Rate: 7 V/μs  Offset Voltag...

View more extracted text
 Low Noise: 8.2 nV/√Hz(f= 1 kHz)  Slew Rate: 7 V/μs  Offset Voltage: 1 mV (max)  EMIRR IN+: 88 dB( under 2.4 GHz)  Low THD+N: 0.0005%  Supply Range: 2.2 V to 5.5 V  Supply Current: 1.4 mA/ch  Low Input Bias Current: 0.3 pA Typical  Rail-to-Rail I/O  High Output Current: 70 mA (1.0 V Drop) Applications  Sensor Signal Conditioning  Consumer Audio  Multi-Pole Active Filters  Control-Loop Amplifiers  Communications  Security  Scanners Description The TP2411, TP2412, and TP2414 are low-cost, single, dual, and quad rail-to-rail output, singlesupply amplifiers featuring low offset and input voltages, low-current

More Datasheets from 3PEAK

Part Number Description
TP2411 Low Noise CMOS RRIO Op-amps
TP2412 Low Noise CMOS RRIO Op-amps
TP2401 Low Noise CMOS Op-amps
TP2402 Low Noise CMOS Op-amps
TP2404 Low Noise CMOS Op-amps
TP2431 1.6MHz Bandwidth Micropower Low Noise Op-amps
TP2432 1.6MHz Bandwidth Micropower Low Noise Op-amps
TP2434 1.6MHz Bandwidth Micropower Low Noise Op-amps
TP2011 Push-Pull Output Comparators
TP2012 Push-Pull Output Comparators