Datasheet4U Logo Datasheet4U.com

TP2412 Datasheet Low Noise CMOS Rrio Op-amps

Manufacturer: 3PEAK

Overview: TP2411/TP2412/TP2414 Low Cost, Low Noise CMOS RRIO Op Amps.

This datasheet includes multiple variants, all published together in a single manufacturer document.

General Description

The TP2411, TP2412, and TP2414 are low-cost, single, dual, and quad rail-to-rail output, singlesupply amplifiers featuring low offset and input voltages, low-current noise, and wide signal bandwidth.

The bination of low offset, low noise, very low input bias currents, and high speed make these amplifiers useful in a wide variety of applications.

Filters, integrators, photodiode amplifiers, and high impedance sensors all benefit from this bination of performance

Key Features

  • Gain-bandwidth Product: 10 MHz.
  • Low Noise: 8.2 nV/√Hz(f= 1 kHz).
  • Slew Rate: 7 V/μs.
  • Offset Voltage: 1 mV (max).
  • EMIRR IN+: 88 dB( under 2.4 GHz).
  • Low THD+N: 0.0005%.
  • Supply Range: 2.2 V to 5.5 V.
  • Supply Current: 1.4 mA/ch.
  • Low Input Bias Current: 0.3 pA Typical.
  • Rail-to-Rail I/O.
  • High Output Current: 70 mA (1.0 V Drop).

More Datasheets from 3PEAK

Part Number Description
TP2411 Low Noise CMOS RRIO Op-amps
TP2414 Low Noise CMOS RRIO Op-amps
TP2401 Low Noise CMOS Op-amps
TP2402 Low Noise CMOS Op-amps
TP2404 Low Noise CMOS Op-amps
TP2431 1.6MHz Bandwidth Micropower Low Noise Op-amps
TP2432 1.6MHz Bandwidth Micropower Low Noise Op-amps
TP2434 1.6MHz Bandwidth Micropower Low Noise Op-amps
TP2011 Push-Pull Output Comparators
TP2012 Push-Pull Output Comparators

TP2412 Distributor