900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






ANPEC

APW8863 Datasheet Preview

APW8863 Datasheet

DDR3 AND DDR4 SYNCHRONOUS BUCK CONTVERTER

No Preview Available !

APW8863
DDR3 AND DDR4 SYNCHRONOUS BUCK CONTVERTER
WITH 1.5A LDO
Features
General Description
Buck Controller (VDDQ)
High Input Voltages Range from 6V to 21V Input
Power
Provide Adjustable Output Voltage from 0.9V to
2V
Integrated MOSFET Drivers and Bootstrap Forward
P-CH MOSFET
Low Quiescent Current (200uA)
Excellent Load Transient Responses
PFM Mode for Increased Light Load Efficiency
Constant On-Time Controller Scheme
- Switching Frequency Compensation for PWM
Mode
- Adjustable Switching Frequency from 400kHz to
550kHz in PWM Mode with DC Output Current
S3 and S5 Pins Control The Device in S0, S3 or S4/
S5 State
Power Good Monitoring
70% Under-Voltage Protection (UVP)
125% Over-Voltage Protection (OVP)
Adjustable Current-Limit Protection
- Using Sense Low-Side MOSFETs RDS(ON)
TQFN-32 4mmx4mm Thin package
Lead Free Available (RoHS Compliant)
+1.5A LDO Section (VTT)
Souring or Sinking Current up to 1.5A
Fast Transient Response for Output Voltage
Output Ceramic Capacitors Support at least 10µF
MLCC
VTT and VTTREF Track at Half the VDDQSNS by
internal divider
+20mV Accuracy for VTT and VTTREF
Independent Over-Current Limit (OCL)
Thermal Shutdown Protection
The APW8863 integrates a synchronous buck PWM con-
verter to generate VDDQ, a sourcing and sinking LDO
linear regulator to generate VTT. It offers the lowest total
solution cost in system where space is at a premium.
The APW8863 provides excellent transient response and
accurate DC voltage output in either PFM or PWM Mode.
In Pulse Frequency Mode (PFM), the APW8863 provides
very high efficiency over light to heavy loads with loading-
modulated switching frequencies. On TQFN-32 Package,
the Forced PWM Mode works nearly at constant frequency
for low-noise requirements.
The APW8863 is equipped with accurate current-limit,
output under-voltage, and output over-voltage protections.
A Power-On- Reset function monitors the voltage on VCC
prevents wrong operation during power on.
The LDO is designed to provide a regulated voltage with
bi-directional output current for DDR-SDRAM termination.
The device integrates two power transistors to source or
sink current up to 1.5A. It also incorporates current-limit
and thermal shutdown protection.
The output voltage of LDO tracks the voltage at VREF pin.
An internal resistor divider is used to provide a half volt-
age of VREF for VTTREF and VTT Voltage. The VTT output
voltage is only requiring 20µF of ceramic output capaci-
tance for stability and fast transient response. The S3
and S5 pins provide the sleep state for VTT (S3 state)
and suspend state (S4/S5 state) for device, when S5 and
S3 are both pulled low the device provides the soft-off for
VTT and VTTREF.
Applications
DDR3 and DDR4 Memory Power Supplies
SSTL-2 SSTL-18 and HSTL Termination
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and
advise customers to obtain the latest version of relevant information to verify before placing orders.
Copyright © ANPEC Electronics Corp.
1
Rev. A.3 - Aug., 2018
www.anpec.com.tw




ANPEC

APW8863 Datasheet Preview

APW8863 Datasheet

DDR3 AND DDR4 SYNCHRONOUS BUCK CONTVERTER

No Preview Available !

APW8863
Simplified Application Circuit
VIN
6V~21V
VDDQ
LOUT
5V
PWM
VCC
RCS Vcc
CS
DDR
LDO
VTT
VDDQ/2
S3 S5
Ordering and Marking Information
APW8863
Lead Free Code
Handling Code
Temperature Range
Package Code
Package Code
QB : TQFN4x4-32
Operating Ambient Temperature Range
I : -40 to 85oC
Handling Code
TR : Tape & Reel
Lead Free Code
G : Halogen and Lead Free Device
APW8863 QB :
APW8863
XXXXX
XXXXX - Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines Greento mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Copyright © ANPEC Electronics Corp.
2
Rev. A.3 - Aug., 2018
www.anpec.com.tw



Part Number APW8863
Description DDR3 AND DDR4 SYNCHRONOUS BUCK CONTVERTER
Maker ANPEC
Total Page 3 Pages
PDF Download

APW8863 Datasheet PDF





Similar Datasheet

1 APW8861 DDR3 AND DDR4 SYNCHRONOUS BUCK CONTVERTER
ANPEC
2 APW8863 DDR3 AND DDR4 SYNCHRONOUS BUCK CONTVERTER
ANPEC
3 APW8868 DDR2 AND DDR3 SYNCHRONOUS BUCK CONTROLLER
ANPEC
4 APW8868B DDR2 AND DDR3/DDR3L SYNCHRONOUS BUCK CONTROLLER
ANPEC
5 APW8868C DDR2 AND DDR3/DDR3L SYNCHRONOUS BUCK CONTROLLER
ANPEC
6 APW8869B DDR2 AND DDR3/DDR3L SYNCHRONOUS BUCK CONTROLLER
ANPEC





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy