Datasheet4U Logo Datasheet4U.com

ATA5761 - (ATA5760 / ATA5761) UHF ASK/FSK Receiver

This page provides the datasheet information for the ATA5761, a member of the ATA5760 (ATA5760 / ATA5761) UHF ASK/FSK Receiver family.

Description

The ATA5760/ATA5761 is a multi-chip PLL receiver device supplied in an SO20 package.

It has been especially developed for the demands of RF low-cost data transmission systems with data rates from 1 kBaud to 10 kBaud in Manchester or Bi-phase code.

Features

  • Two Different IF Receiving Bandwidth Versions Are Available.
  • (BIF = 300 kHz or 600 kHz) Frequency Receiving Range of f0 = 868 MHz to 870 MHz or f0 = 902 MHz to 928 MHz 30 dB Image Rejection Receiving Bandwidth BIF = 600 kHz for Low Cost 90-ppm Crystals and BIF = 300 kHz for 55 ppm Crystals Fully Integrated LC-VCO and PLL Loop Filter Very H.

📥 Download Datasheet

Datasheet preview – ATA5761

📁 Similar Datasheet

  • ATA5723 - (ATA5723 - ATA5728) UHF ASK/FSK Receiver (ATMEL)
  • ATA5724 - (ATA5723 - ATA5728) UHF ASK/FSK Receiver (ATMEL)
  • ATA5728 - (ATA5723 - ATA5728) UHF ASK/FSK Receiver (ATMEL)
  • ATA5749 - Fractional-N PLL Transmitter (ATMEL)
  • ATA5771 - Microcontroller (ATMEL)
  • ATA5771C - UHF ASK/FSK Transmitter (ATMEL)
  • ATA5773 - Microcontroller (ATMEL)
  • ATA5773C - UHF ASK/FSK Transmitter (ATMEL)
  • ATA5774 - Microcontroller (ATMEL)
  • ATA5774C - UHF ASK/FSK Transmitter (ATMEL)
Other Datasheets by ATMEL Corporation

Full PDF Text Transcription

Click to expand full text
Features • Two Different IF Receiving Bandwidth Versions Are Available • • • • • • • • • • • • • • • (BIF = 300 kHz or 600 kHz) Frequency Receiving Range of f0 = 868 MHz to 870 MHz or f0 = 902 MHz to 928 MHz 30 dB Image Rejection Receiving Bandwidth BIF = 600 kHz for Low Cost 90-ppm Crystals and BIF = 300 kHz for 55 ppm Crystals Fully Integrated LC-VCO and PLL Loop Filter Very High Sensitivity with Power Matched LNA High System IIP3 (–16 dBm), System 1-dB Compression Point (–25 dBm) High Large-signal Capability at GSM Band (Blocking –30 dBm at +20 MHz, IIP3 = –12 dBm at +20 MHz) 5V to 20V Automotive Compatible Data Interface Data Clock Available for Manchester- and Bi-phase-coded Signals Programmable Digital Noise Suppression Low Power Consumption Due to Configurable Polling Temperature Ra
Published: |