ACNW261L Overview
The ACPL-061L/ACPL-C61L/ACNW261L is an optically coupled optocoupler that bines an AlGaAs light emitting diode and an integrated high gain photo detector addresses the low power need. The optocoupler consumes extremely low power, at maximum 1.5 mA IDD per channel across temperature. The forward current is as low as 1.6 mA to 4 mA and allows direct current drive by most microprocessors. The CMOS output is slew-rate controlled and is designed to allow the rise time and fall time to be controlled over a wide range of the load capacitance. This unique design provides maximum AC and DC circuit isolation while achieving TTL/CMOS patibility. These optocouplers are suitable for high speed logic interfacing, while consuming extremely low power. Functional Diagram NC 1 Anode 2 Cathode 3 NC 4 Shield 8 VDD 7 VE 6 VO 5 GND TRUTH TABLE (POSITIVE LOGIC) LED ENABLE OUTPUT ON H L OFF H H ON L Z OFF L Z...
ACNW261L Key Features
- Ultra low current IDD consumption: 1.5 mA max
- Low input current capability: 1.6 mA min (ACPL-061L)
- Available packages: SO-8, Stretched SO-8 and 400 mil widebody
- Built-in slew-rate controlled output
- Tri-state output with enable pin VE
- 20 kV/μs minimum mon Mode Rejection (CMR) at
- High Speed: 10 MBd min
- Guaranteed AC and DC performance over wide
- Safety and Regulatory Approval
- UL 1577 recognized