ACNV260E Datasheet | Avago Technologies

2mm DTI, 10MBd Digital Optocoupler Data Sheet Description The new ACNV260E is an optically coupled gate that bines a Al Ga As light emitting diode and an integrated photo detector housed in a widebody package. ACNV260E is designed and manufactured to ply with EN60079-11 ATEX and IECEx. The distance-throughinsulation (DTI) between the emitting diode and photodetector is at 2mm. The output of the detector IC is an open collector Schottky clamped transistor. The internal shield provides a guaranteed mon mode transient immunity specification of 20,000 V/s at Vcm = 1500V This unique design provides maximum ac and dc circuit isolation while achieving TTL patibility. The new ACNV260E is suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and are remended for use in extremely high ground or induced noise environments. Features - pliant to EN60079-11 ATEX and IECEx (375V) -  2mm DTI -  13mm creepage and clearance -  20 k V/s Minimum mon Mode Rejection (CMR) at VCM = 1500 V -  High Speed: 10 MBd Typical -  TTL patible -  Guaranteed ac and dc performance over temperature: -40°C to +105°C -  Available in 10-Pin widebody packages -  Safety Approval - Approval at 5000 Vrms for 1 minute per UL1577 - CSA Applications -  High Voltage insulation -  Intrinsic safety circuit -  PCB Board Power System Isolation -  Industrial Equipment Power Isolation Functional Diagram NC 1 Anode 2 Cathode 3 NC 4 NC 5 SHIELD 10 Vcc 9 Ve 8 Vo 7 GND 6 NC Truth Table (Positive Logic) LED ENABLE OUTPUT On Off On Off On Off H H L L NC NC L H H H L H A 0.1 F bypass capacitor must be connected between pins VCC and GND. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this ponent to prevent damage and/or degradation which may be induced by...