ACNW261L Datasheet | Avago Technologies

ACPL-061L, ACPL-C61L and ACNW261L Ultra Low Power 10 MBd Digital CMOS Optocoupler Data Sheet Description The ACPL-061L/ACPL-C61L/ACNW261L is an optically coupled optocoupler that bines an Al Ga As light emitting diode and an integrated high gain photo detector addresses the low power need. The optocoupler consumes extremely low power, at maximum 1.5 m A IDD per channel across temperature. The forward current is as low as 1.6 m A to 4 m A and allows direct current drive by most microprocessors. These optocouplers support both 3.3 V and 5 V supply voltage with guaranteed AC and DC operational parameters from temperature range -40° C to +105° C. The output of the detector IC is a CMOS output. An enable input allows the detector output to be strobed. The internal Faraday shield provides a guaranteed mon mode transient immunity specification of 20 k V/μs. The CMOS output is slew-rate controlled and is designed to allow the rise time and fall time to be controlled over a wide range of the load capacitance. This unique design provides maximum AC and DC circuit isolation while achieving TTL/CMOS patibility. These optocouplers are suitable for high speed logic interfacing, while consuming extremely low power. Functional Diagram NC 1 Anode 2 Cathode 3 NC 4 Shield 8 VDD 7 VE 6 VO 5 GND TRUTH TABLE (POSITIVE LOGIC) LED ENABLE OUTPUT OFF L ON NC OFF NC Features - Ultra low current IDD consumption: 1.5 m A max - Low input current capability: 1.6 m A min (ACPL-061L), 3 m A min (ACPL-C61L), 4 m A min (ACNW261L) - Available packages: SO-8, Stretched SO-8 and 400 mil widebody - Built-in slew-rate controlled output - Tri-state output with enable pin VE - 20 k V/μs minimum mon Mode Rejection (CMR) at VCM = 1000 V - High Speed: 10 MBd min - Guaranteed AC and DC performance over wide temperature: -40° C to +105° C - Safety and Regulatory Approval - UL 1577...