Datasheet4U Logo Datasheet4U.com

AX3015A - 2A PWM Buck DC/DC Converter

Download the AX3015A datasheet PDF. This datasheet also covers the AX3015 variant, as both devices belong to the same 2a pwm buck dc/dc converter family and are provided as variant models within a single manufacturer datasheet.

General Description

The AX3015/A/B/C series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 2A load without additional transistor.

It saves board space.

The external shutdown function can be controlled by logic level and then come into standby mode.

Key Features

  • small size as exposed pad to reduce the junction-to-case resistance. .

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (AX3015-AXElite.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number AX3015A
Manufacturer AXElite
File Size 841.35 KB
Description 2A PWM Buck DC/DC Converter
Datasheet download datasheet AX3015A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AX3001 Synchronous Boost DC/DC Regulator Anxson
AX3 Ultra-Low Jitter & Power Optimized 3.2 x 2.5mm XO ABRACON
AX31002 Bipolar Tone Ringer IC Avantics
AX3112 PWM Control 3A Step-Down Converter AXE
AX3112A PWM Control 3A Step-Down Converter AXE

Other Datasheets by AXElite

Part Number Description
AX3015 2A PWM Buck DC/DC Converter
AX3015B 2A PWM Buck DC/DC Converter
AX3015C 2A PWM Buck DC/DC Converter
AX3010 2A PWM Buck DC/DC Converter
AX3011 2A PWM Buck DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AX3015/A/B/C 2A PWM Buck DC/DC Converter  GENERAL DESCRIPTION The AX3015/A/B/C series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control having good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage; current limit is against over current operating of the output switch that set by outside resistance. Current limit depends on RSENSE value.