Datasheet4U Logo Datasheet4U.com

A3995 - DMOS Dual Full Bridge PWM Motor Driver

General Description

The A3995 is designed to drive two DC motors at currents up to 2.4 A.

Capable of drive voltages up to 36 V, theA3995 includes two independent fixed off-time PWM current regulators that operate in either fast or slow decay mode, as determined by the MODE input.

Key Features

  • 36 V output rating.
  • 2.4 A, DC motor driver.
  • Synchronous rectification.
  • Internal undervoltage lockout (UVLO).
  • Thermal shutdown circuitry.
  • Crossover-current protection.
  • Very thin profile QFN package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A3998 Dual DMOS Full Bridge Motor Driver Allegro
A39 10 TO 2000 MHz CASCADABLE AMPLIFIER Tyco Electronics
A390 SILICON RECTIFIER Powerex Power Semiconductors
A3901 Dual Full Bridge Low Voltage Motor Driver Allegro
A3903 Low Voltage DC Motor Driver Allegro Micro Systems

Other Datasheets by Allegro MicroSystems

Part Number Description
A3992 DMOS Dual Full-Bridge Microstepping PWM Motor Driver
A3904 Low Voltage Voice Coil Motor Driver
A3906 Low Voltage Stepper and Single/Dual DC Motor Driver
A3908 Low Voltage DC Motor Driver
A3910 Dual Half Bridge Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A3995 DMOS Dual Full Bridge PWM Motor Driver FEATURES AND BENEFITS ▪ 36 V output rating ▪ 2.4 A, DC motor driver ▪ Synchronous rectification ▪ Internal undervoltage lockout (UVLO) ▪ Thermal shutdown circuitry ▪ Crossover-current protection ▪ Very thin profile QFN package PACKAGE: 36-pin QFN 0.90 mm nominal height (suffix EV) Not to scale DESCRIPTION The A3995 is designed to drive two DC motors at currents up to 2.4 A. Capable of drive voltages up to 36 V, theA3995 includes two independent fixed off-time PWM current regulators that operate in either fast or slow decay mode, as determined by the MODE input. Internal synchronous rectification control circuitry is provided to improve power dissipation during PWM operation.