Datasheet4U Logo Datasheet4U.com

ACS713 Datasheet Fully Integrated Hall Effect-Based Linear Current Sensor

Manufacturer: Allegro MicroSystems

📥 Download Datasheet

General Description

The Allegro™ ACS713 provides economical and precise solutions for DC current sensing in industrial, commercial, and communications systems.

The device package allows for easy implementation by the customer.

Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault protection.

Overview

ACS713 Fully Integrated, Hall-Effect-Based Linear Current Sensor IC with 2.

Key Features

  • Low-noise analog signal path.
  • Device bandwidth is set via the new FILTER pin.
  • 5 µs output rise time in response to step input current.
  • 80 kHz bandwidth.
  • Total output error 1.5% at TA = 25°C.
  • Small footprint, low-profile SOIC8 package.
  • 1.2 mΩ internal conductor resistance.
  • 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8.
  • 5.0 V, single supply operation.
  • 133 to 185 mV/A output sensitivity.
  • Output voltage proportional to DC curren.

More Datasheets from Allegro MicroSystems

Part Number Description
ACS710 120kHz Bandwidth High Voltage Isolation Current Sensor
ACS711 Hall Effect Linear Current Sensor
ACS712 Fully Integrated / Hall Effect-Based Linear Current Sensor
ACS714 Hall Effect-Based Linear Current Sensor
ACS715 Hall Effect-Based Linear Current Sensor
ACS716 120 kHz Bandwidth High Voltage Isolation Current Sensor
ACS704ELC-005 Fully Integrated / Hall Effect-Based Linear Current Sensor
ACS704ELC-015 Fully Integrated / Hall Effect-Based Linear Current Sensor
ACS706ELC-05C Hall Effect Based Linear Current Sensor
ACS706ELC-20A Hall Effect Based Linear Current Sensor