Datasheet4U Logo Datasheet4U.com

ACS706ELC-20A - Hall Effect Based Linear Current Sensor

Key Features

  • Small footprint, low-profile SOIC8 package.
  • 1.5 mΩ internal conductor resistance.
  • Excellent replacement for sense resistors.
  • 1600 VRMS minimum isolation voltage between pins 1-4 and 5-8.
  • 4.5 to 5.5 V, single supply operation.
  • 50 kHz bandwidth.
  • 100 mV/A output sensitivity and 20 A dynamic range.
  • Output voltage proportional to ac and dc currents.
  • Factory-trimmed for accuracy.
  • Extremely stable output offset v.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACS70310 Programmable Linear Hall-Effect Sensor Allegro
ACS70311 Programmable Linear Hall-Effect Sensor Allegro
ACS70331 GMR-Based Current Sensor Allegro
ACS71020 AC Power Monitoring Allegro
ACS71240 Galvanically Isolated Current Sensor Allegro

Other Datasheets by Allegro MicroSystems

Part Number Description
ACS706ELC-05C Hall Effect Based Linear Current Sensor
ACS704ELC-005 Fully Integrated / Hall Effect-Based Linear Current Sensor
ACS704ELC-015 Fully Integrated / Hall Effect-Based Linear Current Sensor
ACS709 Fast Fault Response Current Sensor
ACS710 120kHz Bandwidth High Voltage Isolation Current Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ACS706ELC-20A Bidirectional 1.5 mΩ Hall Effect Based Linear Current Sensor IC with Voltage Isolation and 20 A Dynamic Range Package LC 8 7 1 6 2 5 3 4 Pin 1: IP+ Pin 2: IP+ Pin 3: IP– Pin 4: IP– Pin 5: GND Pin 6: VOUT Pin 7: VOUT Pin 8: VCC Nominal Operating Temperature, TA Range E............................................ –40 to 85ºC Overcurrent Transient Tolerance*, IP ................ 60 A *100 total pulses, 250 ms duration each, applied at a rate of 1 pulse every 100 seconds. ABSOLUTE MAXIMUM RATINGS Supply Voltage, VCC .......................................... 16 V Reverse Supply Voltage, VRCC ........................ –16 V Output Voltage, VOUT ........................................ 16 V Reverse Output Voltage, VROUT...................... –0.