AOZ1341 - Dual Channel USB Switch

Alpha & Omega Semiconductors

General Description

The AOZ1341 is a member of Alpha and Omega Semiconductor’s dual channel power distribution switch family intended for applications where heavy capacitive loads and short-circuits are likely to be encountered.

Key Features

z Typical 70 mΩ (NFET) z 1 A maximum continuous current z VIN Range: 2.7 V to 5.5 V z Open Drain Fault Flag z Fault Flag.

📥 Download Datasheet

AOZ1341 dual channel usb switch by Alpha & Omega Semiconductors - Datasheet Preview

Datasheet Details

Part number	AOZ1341
Manufacturer	Alpha & Omega Semiconductors
File Size	827.26 KB
Description	Dual Channel USB Switch
Datasheet	AOZ1341 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
AOZ1015	EZBuck 1.5A Synchronous Buck Regulator	Alpha and Omega Semiconductors
AOZ1017	EZBuck 3A Simple Regulator	Alpha and Omega Semiconductors
AOZ1018	EZBuck 2A Simple Regulator	Alpha and Omega Semiconductors
AOZ1019	EZBuck 2A Simple Regulator	Alpha and Omega Semiconductors
AOZ1020	2A Synchronous Buck Regulator	Alpha and Omega Semiconductors

Other Datasheets by Alpha & Omega Semiconductors

Part Number	Description
AOZ1342	Dual Channel USB Switch
AOZ1300	Programmable 4A Power Distribution Switch
AOZ13058DI	55V Smart Protection Switch
AOZ1310	Single Channel USB Switch
AOZ1312	Single Channel USB Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

AOZ1341 Dual Channel USB Switch General Description The AOZ1341 is a member of Alpha and Omega Semiconductor’s dual channel power distribution switch family intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70 mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V.