900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Analog Devices Semiconductor Electronic Components Datasheet

ADG836 Datasheet

0.5CMOS 1.65 V TO 3.6 V Dual SPDT/2:1 MUX

No Preview Available !

FEATURES
0.5 Typical On Resistance
0.8 Maximum On Resistance at 125°C
1.65 V to 3.6 V Operation
Automotive Temperature Range: –40°C to +125°C
High Current Carrying Capability: 300 mA Continuous
Rail-to-Rail Switching Operation
Fast Switching Times <20 ns
Typical Power Consumption (<0.1 W)
APPLICATIONS
Cellular Phones
PDAs
MP3 Players
Power Routing
Battery-Powered Systems
PCMCIA Cards
Modems
Audio and Video Signal Routing
Communication Systems
0.5 CMOS 1.65 V TO 3.6 V
Dual SPDT/2:1 MUX
ADG836
FUNCTIONAL BLOCK DIAGRAM
������
���
���
���
���
���
���
��
��
�������� ����� ��� � ����� � �����
GENERAL DESCRIPTION
The ADG836 is a low voltage CMOS device containing two
independently selectable single-pole, double-throw (SPDT)
switches. This device offers ultralow on resistance of less than
0.8 over the full temperature range. The ADG836 is fully
specified for 3.3 V, 2.5 V, and 1.8 V supply operation.
Each switch conducts equally well in both directions when on
and has an input signal range that extends to the supplies. The
ADG836 exhibits break-before-make switching action.
The ADG836 is available in 10-lead MSOP and 3 mm 3 mm
12-lead LFCSP packages.
PRODUCT HIGHLIGHTS
1. <0.8 over full temperature range of –40°C to +125°C.
2. Single 1.65 V to 3.6 V operation.
3. Compatible with 1.8 V CMOS logic.
4. High current handling capability (300 mA continuous current
at 3.3 V).
5. Low THD + N (0.02% typ).
6. 3 mm 3 mm LFCSP package and 10-lead MSOP package.
REV. 0
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
that may result from its use. No license is granted by implication or oth-
erwise under any patent or patent rights of Analog Devices.Trademarks
and registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© 2003 Analog Devices, Inc. All rights reserved.


Analog Devices Semiconductor Electronic Components Datasheet

ADG836 Datasheet

0.5CMOS 1.65 V TO 3.6 V Dual SPDT/2:1 MUX

No Preview Available !

ADG836–SPECIFICATIONS1
(VDD = 2.7 V to 3.6 V, GND = 0 V, unless otherwise noted.)
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
On Resistance Match between
Channels (RON)
On Resistance Flatness (RFLAT (ON))
LEAKAGE CURRENTS
Source Off Leakage IS (OFF)
Channel On Leakage ID, IS (ON)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current
IINL or IINH
CIN, Digital Input Capacitance
DYNAMIC CHARACTERISTICS2
tON
tOFF
Break-before-Make Time Delay (tBBM)
Charge Injection
Off Isolation
Channel-to-Channel Crosstalk
–40C –40C
+25C to +85C to +125C
0.5
0.65 0.75
0.04
0.075
0.1
0.15
0 V to VDD
0.8
0.08
0.16
±0.2
±1 ±10
±0.2
±1 ±15
±100
±120
0.005
4
2
0.8
±0.1
21
26 28
4
78
17
40
–67
–90
29
9
5
–67
Total Harmonic Distortion (THD + N) 0.02
Insertion Loss
–3 dB Bandwidth
CS (OFF)
CD, CS (ON)
POWER REQUIREMENTS
IDD
–0.05
57
25
75
0.003
NOTES
1Temperature range is as follows: Y version: –40°C to +125°C.
2Guaranteed by design, not subject to production test.
Specifications subject to change without notice.
1
4
Unit
Test Conditions/Comments
V
typ
max
typ
max
typ
max
nA typ
nA max
nA typ
nA max
VDD = 2.7 V
VDD = 2.7 V, VS = 0 V to VDD, IS = 10 mA;
Test Circuit 1
VDD = 2.7 V, VS = 0.65 V, IS = 10 mA
VDD = 2.7 V, VS = 0 V to VDD,
IS = 10 mA
VDD = 3.6 V
VS = 0.6 V/3.3 V, VD = 3.3 V/0.6 V;
Test Circuit 2
VS = VD = 0.6 V or 3.3 V; Test Circuit 3
V min
V max
µA typ
µA max
pF typ
VIN = VINL or VINH
ns typ
ns max
ns typ
ns max
ns typ
ns min
pC typ
dB typ
dB typ
dB typ
%
dB typ
MHz typ
pF typ
pF typ
µA typ
µA max
RL = 50 , CL = 35 pF
VS = 1.5 V/0 V; Test Circuit 4
RL = 50 , CL = 35 pF
VS = 1.5 V; Test Circuit 4
RL = 50 , CL = 35 pF
VS1 = VS2 = 1.5 V; Test Circuit 5
VS = 1.5 V, RS = 0 , CL = 1 nF;
Test Circuit 6
RL = 50 , CL = 5 pF, f = 100 kHz;
Test Circuit 7
S1A–S2A/S1B–S2B;
RL = 50 , CL = 5 pF, f = 100 kHz;
Test Circuit 10
S1A–S1B/S2A–S2B;
RL = 50 , CL = 5 pF, f = 100 kHz;
Test Circuit 9
RL = 32 , f = 20 Hz to 20 kHz,
VS = 2 V p-p
RL = 50 , CL = 5 pF; Test Circuit 8
RL = 50 , CL = 5 pF; Test Circuit 8
VDD = 3.6 V
Digital Inputs = 0 V or 3.6 V
–2– REV. 0


Part Number ADG836
Description 0.5CMOS 1.65 V TO 3.6 V Dual SPDT/2:1 MUX
Maker Analog Devices
Total Page 12 Pages
PDF Download

ADG836 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 ADG836 0.5CMOS 1.65 V TO 3.6 V Dual SPDT/2:1 MUX
Analog Devices
2 ADG836L 0.5 OHM CMOS 1.65 V to 3.6 V Dual SPDT/2:1 MUX
Analog Devices
3 ADG839 Single SPDT Switch/2:1 MUX
Analog Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy