0.8 Ω typical on resistance
Less than 1 Ω maximum on resistance at 85°C
1.8 V to 5.5 V single supply
High current carrying capability: 300 mA continuous
Rail-to-rail switching operation
Fast-switching times: <17 ns
Typical power consumption: <0.1 µW
1.30 mm × 1.60 mm, 10-lead mini LFCSP
Audio and video signal routing
The ADG852 is a low voltage CMOS single-pole, double-throw
(SPDT) switch. This device offers ultralow on resistance of less
than 1 Ω over the full temperature range. The ADG852 is fully
specified for 5.5 V and 3.3 V supply operation.
Each switch conducts equally well in both directions when on,
and has an input signal range that extends to the supplies. The
ADG852 exhibits break-before-make switching action.
The ADG852 is available in a 1.30 mm × 1.60 mm 10-lead
0.8 Ω CMOS, 1.8 V to 5.5 V,
SPDT/2:1 Mux Mini LFCSP
FUNCTIONAL BLOCK DIAGRAM
1. SWITCHES SHOWN
FOR A LOGIC 1 INPUT.
1. <1 Ω over full temperature range of −40°C to +85°C.
2. Single 1.8 V to 5.5 V operation.
3. Compatible with 1.8 V CMOS logic.
4. High current handling capability (300 mA continuous
current per channel).
5. Low THD + N: 0.08% typical.
6. 1.30 mm × 1.60 mm, 10-lead mini LFCSP.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices foritsuse,nor foranyinfringementsofpatentsorother
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Fax: 781.461.3113 ©2008–2012 Analog Devices, Inc. All rights reserved.