Datasheet4U Logo Datasheet4U.com

ADIN1300 Datasheet 10/100/1000 Gigabit Ethernet PHY

Manufacturer: Analog Devices

General Description

► Supports TSN ► EMC test standards ► IEC 61000-4-5 surge (±4 kV) ► IEC 61000-4-4 electrical fast transient (EFT) (±4 kV) ► IEC 61000-4-2 ESD (±6 kV contact discharge) ► IEC 61000-4-6 conducted immunity (10 V) ► EN55032 radiated and conducted emissions (Class A) ► Unmanaged configuration using multilevel pin strapping ► MDIO/MDC management interface and interrupt pin ► EEE in accordance with IEEE 802.3az ► Start of packet detection for IEEE 1588 time stamp support ► Enhanced link detection ► Voltage mode MDI drivers, eliminates termination resistors ► RJ45 MDI flip capability ► Automatic polarity and pair swap correction ► Cable diagnostics (TDR and signal analysis) ► Frame generator and checker, multiple loopback modes ► Configurable LED ► 25 MHz/125 MHz synchronous clock output ► Jumbo frame support up to 16 kB ► Small package and wide temperature range ► 40-lead, 6 mm × 6 mm LFCSP ► Specified for −40°C to +105°C ambient operation ► Low power consumption ► 330 mW for 1000BASE-T ► 140 mW for 100BASE-TX ► 3.3 V/2.5 V/1.8 V MAC interface VDDIO supply The ADIN1300 is a low power, single port, Gigabit Ethernet transceiver with low latency and power consumption specifications primarily designed for industrial Ethernet applications.

This design integrates an energy efficient Ethernet (EEE) physical layer device (PHY) core with all associated common analog circuitry, input and output clock buffering, management interface and subsyst

Overview

Data Sheet ADIN1300 Robust, Industrial, Low Latency and Low Power 10 Mbps, 100 Mbps, and 1 Gbps Ethernet.

Key Features

  • 10BASE-Te/100BASE-TX/1000BASE-T IEEE 802.3 compliant.
  • MII, RMII, and RGMII MAC interfaces.
  • 1000BASE-T RGMII latency transmit.