ADL5542 Datasheet | Analog Devices

FEATURES Fixed gain of 20 d B Operation up to 6 GHz Input/output internally matched to 50 Ω Integrated bias control circuit Output IP3 46 d Bm at 500 MHz 40 d Bm at 900 MHz .. Output 1 d B pression: 20.6 d B at 900 MHz Noise figure of 3 d B at 900 MHz Single 5 V power supply Small footprint 8-lead LFCSP Pin patible with 15 d B gain ADL5541 1 k V ESD (Class 1C) FUNCTIONAL BLOCK DIAGRAM INPUT MATCH OUTPUT MATCH RFIN 1 GND 2 GND 3 RFOUT GND GND VPOS 06879-001 BIAS CONTROL CB 4 Figure 1. GENERAL DESCRIPTION The ADL5542 is a broadband 20 d B linear amplifier that operates at frequencies up to 6 GHz. The device can be used in a wide variety of CATV, cellular, and instrumentation equipment. The ADL5542 provides a gain of 20 d B that is stable over frequency, temperature, power supply, and from device to device. The device is internally matched to 50 Ω with an input return loss of 10 d B or better, up to 6 GHz. Only input/output ac coupling capacitors, power supply decoupling capacitors, and an external inductor are required for operation. The ADL5542 is fabricated on an In Ga P HBT process and has an ESD rating of 1 k V (Class 1C). The device is packaged in a 3 mm × 3 mm LFCSP that uses an exposed paddle for excellent thermal impedance. The ADL5542 consumes 93 m A on a single 5 V supply and is fully specified for operation from - 40°C to +85°C. A fully populated Ro HS-pliant evaluation board is available. The ADL5541 is a panion part that offers a gain of 15 d B in a pin-patible package. Rev. A Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective...