Datasheet4U Logo Datasheet4U.com

ADM1173 - 2.7V to 16.5V Hot Swap Controller

General Description

The ADM1173 is a Hot Swap controller that allows a board to be safely inserted and removed from a live backplane.

An internal charge pumped driver controls the GATE of an external high side N-channel FET for a supply voltage ranging from 2.7V to 16.5V.

Key Features

  • Allows Safe Board Insertion and Removal from a Live Backplane Controls Supply Voltages from 2.7 V to 16.5V Adjustable Analog Current Limit with Circuit Breaker Fast Response Limits Peak Fault Current Automatic Retry or Latch-Off On Current Fault Adjustable Voltage Slew Rate Control Charge Pumped Gate Drive for External N-FET Switch TIMER pin allows control over timing functions Undervoltage Lockout 8-pin TSOT Package 2.7V to 16.5V Hot Swap Controller with Tracking or Slew Rate Control ADM1173 G.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADM10-D05 AC / DC CONVERTER REICU
ADM10-D05-05 AC / DC CONVERTER REICU
ADM10-D05-12 AC / DC CONVERTER REICU
ADM10-D05-24 AC / DC CONVERTER REICU
ADM10-D12 AC / DC CONVERTER REICU

Other Datasheets by Analog Devices

Part Number Description
ADM1170 Hot Swap Controller
ADM1171 Hot Swap Controller
ADM1172 Hot Swap Controller
ADM1175 Hot Swap Controller and Digital Power Monitor
ADM1176 Hot Swap Controller and I2C Power Monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Preliminary Technical Data FEATURES Allows Safe Board Insertion and Removal from a Live Backplane Controls Supply Voltages from 2.7 V to 16.5V Adjustable Analog Current Limit with Circuit Breaker Fast Response Limits Peak Fault Current Automatic Retry or Latch-Off On Current Fault Adjustable Voltage Slew Rate Control Charge Pumped Gate Drive for External N-FET Switch TIMER pin allows control over timing functions Undervoltage Lockout 8-pin TSOT Package 2.7V to 16.5V Hot Swap Controller with Tracking or Slew Rate Control ADM1173 GENERAL DESCRIPTION The ADM1173 is a Hot Swap controller that allows a board to be safely inserted and removed from a live backplane. An internal charge pumped driver controls the GATE of an external high side N-channel FET for a supply voltage ranging from 2.