Datasheet4U Logo Datasheet4U.com

HMC-APH518 - GaAs HEMT MMIC 1WATT POWER AMPLIFIER

Description

The HMC-APH518 is a two stage GaAs HEMT MMIC 1 Watt Power Amplifier which operates between 21 and 24 GHz.

The HMC-APH518 provides 17 dB of gain, and an output power of +30.5 dBm at 1 dB compression from a +5V supply voltage.

Features

  • Output IP3: +39 dBm P1dB: +30.5 dBm Gain: 17 dB Supply Voltage: +5V 50 Ohm Matched Input/Output Die Size: 4.49 x 1.31 x 0.1 mm General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMC-APH510 GaAs HEMT MMIC POWER AMPLIFIER Hittite Microwave Corporation
HMC-APH596 GaAs HEMT MMIC POWER AMPLIFIER Hittite Microwave Corporation
HMC-APH196 GaAs HEMT MMIC POWER AMPLIFIER Hittite Microwave Corporation
HMC-APH403 GaAs HEMT MMIC POWER AMPLIFIER Hittite Microwave Corporation
HMC-APH460 GaAs HEMT MMIC POWER AMPLIFIER Hittite Microwave Corporation

Other Datasheets by Analog Devices

Part Number Description
HMC-ABH209 GaAs HEMT MMIC MEDIUM POWER AMPLIFIER
HMC-ABH241 GaAs HEMT MMIC MEDIUM POWER Amplifier
HMC-ABH264 GaAs PHEMT MMIC MEDIUM POWER AMPLIFIER
HMC-ALH102 GaAs HEMT MMIC WIDEBAND LOW-NOISE AMPLIFIER
HMC-ALH140 GaAs HEMT MMIC LOW NOISE AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LINEAR & POWER AMPLIFIERS - CHIP v02.0208 Typical Applications This HMC-APH518 is ideal for: • Point-to-Point Radios 3 • Point-to-Multi-Point Radios • VSAT • Military & Space Functional Diagram HMC-APH518 GaAs HEMT MMIC 1 WATT POWER AMPLIFIER, 21 - 24 GHz Features Output IP3: +39 dBm P1dB: +30.5 dBm Gain: 17 dB Supply Voltage: +5V 50 Ohm Matched Input/Output Die Size: 4.49 x 1.31 x 0.1 mm General Description The HMC-APH518 is a two stage GaAs HEMT MMIC 1 Watt Power Amplifier which operates between 21 and 24 GHz. The HMC-APH518 provides 17 dB of gain, and an output power of +30.5 dBm at 1 dB compression from a +5V supply voltage. All bond pads and the die backside are Ti/Au metallized and the amplifier device is fully passivated for reliable operation.
Published: |