Datasheet4U Logo Datasheet4U.com

OP179 - Rail-to-Rail High Output Current Operational Amplifiers

Datasheet Summary

Description

The OP179 and OP279 are rail-to-rail, high output current, single-supply amplifiers.

They are designed for low voltage applications that require either current or capacitive load drive capability.

Features

  • Rail-to-Rail Inputs and Outputs High Output Current: ؎60 mA Single Supply: 5 V to 12 V Wide Bandwidth: 5 MHz High Slew Rate: 3 V/␮s Low Distortion: 0.01% Unity-Gain Stable No Phase Reversal Short-Circuit Protected Drives Capacitive Loads: 10 nF.

📥 Download Datasheet

Datasheet preview – OP179

Datasheet Details

Part number OP179
Manufacturer Analog Devices
File Size 249.56 KB
Description Rail-to-Rail High Output Current Operational Amplifiers
Datasheet download datasheet OP179 Datasheet
Additional preview pages of the OP179 datasheet.

📁 Similar Datasheet

  • OP10 - Dual Matched Instrumentation Operational Amplifier (PMI)
  • OP10 - Dual Matched Instrumentation Operational Amplifier (Analog)
  • OP123 - Hermetic Infrared Emitting Diode (TT)
  • OP124 - Hermetic Infrared Emitting Diode (TT)
  • OP1270 - Axial Fiber Optic Isolator (OPTEK Technologies)
  • OP130 - Hermetic Infrared Diode (TT)
  • OP131 - Hermetic Infrared Diode (TT)
  • OP132 - Hermetic Infrared Diode (TT)
  • OP133 - Hermetic Infrared Diode (TT)
  • OP140 - Emitting Diode (TT)
Other Datasheets by Analog Devices
  • OP17 - Precision JFET-Input Operational Amplifiers
  • OP176 - Bipolar/JFET / Audio Operational Amplifier
  • OP177 - Ultraprecision Operational Amplifier
  • OP11 - Quad Matched 741-Type Operational Amplifiers
  • OP113 - Low Noise / Low Drift Single-Supply Operational Amplifiers
  • OP1177 - Precision Low Noise / Low Input Bias Current Operational Amplifiers
  • OP14 - DUAL MATCHED HIGH PERFORMANCE OPERATIONAL AMPLIFIERS
  • OP15 - Precision JFET-Input Operational Amplifiers

Full PDF Text Transcription

Click to expand full text
a Rail-to-Rail High Output Current Operational Amplifiers FEATURES Rail-to-Rail Inputs and Outputs High Output Current: ؎60 mA Single Supply: 5 V to 12 V Wide Bandwidth: 5 MHz High Slew Rate: 3 V/␮s Low Distortion: 0.01% Unity-Gain Stable No Phase Reversal Short-Circuit Protected Drives Capacitive Loads: 10 nF APPLICATIONS Multimedia Telecom DAA Transformer Driver LCD Driver Low Voltage Servo Control Modems FET Drivers GENERAL DESCRIPTION The OP179 and OP279 are rail-to-rail, high output current, single-supply amplifiers. They are designed for low voltage applications that require either current or capacitive load drive capability. The OP179/OP279 can sink and source currents of ± 60 mA (typical) and are stable with capacitive loads to 10 nF.
Published: |