900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Analog Devices Semiconductor Electronic Components Datasheet

OP284 Datasheet

Precision Rail-to-Rail Input & Output Operational Amplifiers

No Preview Available !

Precision Rail-to-Rail
Input and Output Operational Amplifiers
OP184/OP284/OP484
FEATURES
Single-supply operation
Wide bandwidth: 4 MHz
Low offset voltage: 65 μV
Unity-gain stable
High slew rate: 4.0 V/ μs
Low noise: 3.9 nV/√Hz
APPLICATIONS
Battery-powered instrumentation
Power supply control and protection
Telecommunications
DAC output amplifier
ADC input buffer
GENERAL DESCRIPTION
The OP184/OP284/OP484 are single, dual, and quad single-supply,
4 MHz bandwidth amplifiers featuring rail-to-rail inputs and
outputs. They are guaranteed to operate from 3 V to 36 V (or
±1.5 V to ±18 V).
These amplifiers are superb for single-supply applications requiring
both ac and precision dc performance. The combination of wide
bandwidth, low noise, and precision makes the OP184/OP284/
OP484 useful in a wide variety of applications, including filters
and instrumentation.
Other applications for these amplifiers include portable telecom-
munications equipment, power supply control and protection,
and use as amplifiers or buffers for transducers with wide output
ranges. Sensors requiring a rail-to-rail input amplifier include
Hall effect, piezoelectric, and resistive transducers.
The ability to swing rail-to-rail at both the input and output
enables designers to build multistage filters in single-supply
systems and to maintain high signal-to-noise ratios.
The OP184/OP284/OP484 are specified over the hot extended
industrial temperature range of −40°C to +125°C. The single
OP184 is available in 8-lead SOIC surface mount packages. The
dual OP284 is available in 8-lead PDIP and SOIC surface mount
packages. The quad OP484 is available in 14-lead PDIP and
14-lead, narrow-body SOIC packages.
Table 1. Low Noise Op Amps
Voltage Noise
0.9 nV
Single
AD797
Dual
Quad
1.1 nV
AD8597
AD8599
1.8 nV
ADA4004-1
ADA4004-2
ADA4004-4
Rev. J
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
PIN CONFIGURATIONS
DNC 1
OP184 8 NC
–IN A 2
+IN A 3
V– 4
+
TOP VIEW
(Not to Scale)
7 V+
6 OUT A
5 DNC
NOTES
1. NC = NO CONNECT
2. DNC = DO NOT CONNECT
Figure 1. 8-Lead SOIC (S-Suffix)
OUT A 1
OP284
8 V+
–IN A 2
7 OUT B
+IN A 3
6 –IN B
V– 4
TOP VIEW
(Not to Scale)
5 +IN B
Figure 2. 8-Lead PDIP (P-Suffix)
8-Lead SOIC (S-Suffix)
OUT A 1
–IN A 2
+IN A 3
V+ 4
+IN B 5
–IN B 6
OUT B 7
OP484
TOP VIEW
(Not to Scale)
14 OUT D
13 –IN D
12 +IN D
11 V–
10 +IN C
9 –IN C
8 OUT C
Figure 3. 14-Lead PDIP (P-Suffix)
14-Lead Narrow-Body SOIC (S-Suffix)
2.8 nV
AD8675/ADA4075-2
AD8676
3.2 nV
OP27
OP270
OP470
3.8 nV
AD8671
AD8672
AD8674
3.9 nV
OP184
OP284
OP484
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©1996–2011 Analog Devices, Inc. All rights reserved.


Analog Devices Semiconductor Electronic Components Datasheet

OP284 Datasheet

Precision Rail-to-Rail Input & Output Operational Amplifiers

No Preview Available !

OP184/OP284/OP484
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description ......................................................................... 1
Pin Configurations ........................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Electrical Characteristics ............................................................. 3
Absolute Maximum Ratings............................................................ 6
Thermal Resistance ...................................................................... 6
ESD Caution.................................................................................. 6
Typical Performance Characteristics ............................................. 7
Applications Information .............................................................. 14
Functional Description.............................................................. 14
Input Overvoltage Protection ................................................... 14
REVISION HISTORY
4/11—Rev. I to Rev J
Change to Figure 27 ....................................................................... 10
10/10—Rev. H to Rev I
Change to Output Characteristics, Output Voltage High
Parameter, Table 2............................................................................. 3
Change to Output Characteristics, Output Voltage High
Parameter, Table 3............................................................................. 4
7/10—Rev. G to Rev. H
Added Table 1.................................................................................... 1
2/09—Rev. F to Rev. G
Change to Large Signal Voltage Gain, Table 3 .............................. 5
Updated Outline Dimensions ....................................................... 21
Changes to Ordering Guide .......................................................... 22
9/08—Rev. E to Rev. F
Changes to General Description .................................................... 1
Changes to Figure 4.......................................................................... 6
Changes to Low Dropout Regulator with Current Limiting .... 20
7/08—Rev. D to Rev. E
Changes to Figure 1.......................................................................... 1
Changes to Figure 12........................................................................ 8
Changes to Figure 36 and Figure 37............................................. 12
Changes to Designing Low Noise Circuits in Single-Supply
Applications Section....................................................................... 15
Updated Outline Dimensions ....................................................... 21
Changes to Ordering Guide .......................................................... 22
Output Phase Reversal............................................................... 15
Designing Low Noise Circuits in Single-Supply Applications
....................................................................................................... 15
Overdrive Recovery ................................................................... 16
Single-Supply, 3 V Instrumentation Amplifier ...................... 16
2.5 V Reference from a 3 V Supply .......................................... 17
5 V Only, 12-Bit DAC Swings Rail-to-Rail ............................. 17
High-Side Current Monitor ...................................................... 18
Capacitive Load Drive Capability ............................................ 18
Low Dropout Regulator with Current Limiting..................... 19
3 V, 50 Hz/60 Hz Active Notch Filter with False Ground..... 20
Outline Dimensions ....................................................................... 21
Ordering Guide .......................................................................... 23
4/06—Rev. C to Rev. D
Changes to Table 1.............................................................................3
Changes to Table 2.............................................................................4
Changes to Table 3.............................................................................5
Deleted Reference to 1993 System Applications Guide .............. 15
3/06—Rev. B to Rev. C
Changes to Figure 1 Caption............................................................1
Changes to Table 1.............................................................................3
Changes to Table 2.............................................................................4
Changes to Table 3.............................................................................5
Changes to Table 4.............................................................................6
Changes to Figure 5 through Figure 9 ............................................7
Changes to Functional Description Section ............................... 14
Deleted SPICE Macro Model........................................................ 21
Updated Outline Dimensions....................................................... 21
Changes to Ordering Guide .......................................................... 22
9/02—Rev. A to Rev. B
Changes to Pin Configurations .......................................................1
Changes to Specifications, Input Bias Current Maximum ..........2
Changes to Ordering Guide .............................................................5
Updated Outline Dimensions....................................................... 19
6/02—Rev. 0 to Rev. A
10/96—Revision 0: Initial Version
Rev. J | Page 2 of 24


Part Number OP284
Description Precision Rail-to-Rail Input & Output Operational Amplifiers
Maker Analog Devices
PDF Download

OP284 Datasheet PDF






Similar Datasheet

1 OP281 Ultralow Power / Rail-to-Rail Output Operational Amplifiers
Analog Devices
2 OP282 Dual/Quad Low Power / High Speed JFET Operational Amplifiers
Analog Devices
3 OP283 5 MHz Single-Supply Operational Amplifiers
Analog Devices
4 OP284 Precision Rail-to-Rail Input & Output Operational Amplifiers
Analog Devices
5 OP285 Dual 9 MHz Precision Operational Amplifier
Analog Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy