Datasheet4U Logo Datasheet4U.com

TMC9660 - 70V Smart Gate Driver

Description

The TMC9660 is a highly integrated monolithic gate driver and motor controller IC with buck converter.

Features

  • Three-Phase Permanent Magnet Synchronous Motors (PMSM)/Brushless DC (BLDC), Two-Phase Stepper Motor, and Brushed DC Motor Support.
  • 7.7V to 70V Single-Supply Operating Voltage Range.
  • Smart Gate Driver with Adjustable Strength up to 1A/2A Source/Sink.
  • Field-Oriented Controller/FOC in Hardware for Wide Bandwidth Current Control Loop.
  • Position, Velocity, and Torque Controller in Hardware for Fast and Precise Control.
  • 8-Point Ramp Gene.

📥 Download Datasheet

Datasheet preview – TMC9660

Datasheet Details

Part number TMC9660
Manufacturer Analog Devices
File Size 2.49 MB
Description 70V Smart Gate Driver
Datasheet download datasheet TMC9660 Datasheet
Additional preview pages of the TMC9660 datasheet.

📁 Similar Datasheet

  • TMC-401 - Motion Controller (TRINAMIC)
  • TMC-4B28 - High power VCSEL TO-46 metal (ETC)
  • TMC-4F20 - VCSEL TO-46 metal can (ETC)
  • TMC-4F28 - High power VCSEL TO-46 metal can (ETC)
  • TMC-4F30-xxx - VCSEL TO-46 metal can (ETC)
  • TMC-5A31-xxx - High Speed VCSEL TO-46 metal can (ETC)
  • TMC-5B21 - High speed VCSEL TO-46 metal can (ETC)
  • TMC-5F31-XXX - High speed VCSEL TO-46 metal can (ETC)
  • TMC-5F40 - High speed VCSEL TO-46 metal can (ETC)
  • TMC-8D43 - 2 GHZ GAAS PIN PLUS AMPLIFIER (ETC)
Other Datasheets by Analog Devices
  • TMC2160A - Universal high voltage driver
  • TMC2240 - Smart Integrated Stepper Driver
  • TMC249A - SPI or Classic Analog Interface Stepper
  • TMC5240 - Smart Integrated Stepper Driver and Controller
  • TMC6100 - Universal high voltage BLDC/PMSM/Servo MOSFET 3-halfbridge gate-driver

Full PDF Text Transcription

Click to expand full text
70V Smart Gate Driver with Servo (FOC) Controller in HW and Buck Converter TMC9660 General Description The TMC9660 is a highly integrated monolithic gate driver and motor controller IC with buck converter. It includes a smart gate driver, a high-performance motion controller with hardware-based field-oriented control (FOC) and servo controller (velocity, position, ramp generator), motor position feedback interfaces (A/B/N encoder, hall), an analog signal processing block for bottom shunt current measurement (programmable current-sense amplifiers [CSAs] and analog-to-digital converters [ADCs]). It also includes a powerful and flexible power management unit (PMU) along with a buck converter and programmable low-dropout (LDO) regulators.
Published: |