Datasheet4U Logo Datasheet4U.com

BCT3222 - 6 Channel LED Driver

Description

The BCT3222 is a high performance white LED driver.

The BCT3222 uses an internal resistor to set the bias current for four LEDs, which are matched to +/-1.5%.

Features

  • Drive Common Anode or Common Cathode LEDs.
  • Low 50mV Dropout at 20mA.
  • 20mA full scale current.

📥 Download Datasheet

Datasheet preview – BCT3222

Datasheet Details

Part number BCT3222
Manufacturer BROADCHIP
File Size 191.67 KB
Description 6 Channel LED Driver
Datasheet download datasheet BCT3222 Datasheet
Additional preview pages of the BCT3222 datasheet.

📁 Similar Datasheet

Other Datasheets by BROADCHIP
  • BCT3220 - 4-Channel Common-Anode LED Driver
  • BCT3221 - 4-Channel LED Driver
  • BCT3228 - 8 Channel LED Driver
  • BCT3236 - 36-CHANNELS LED DRIVER
  • BCT3253 - 3ch Current Sink RGB LED driver
  • BCT3256 - 6 Channel Constant Current LED Driver
  • BCT3258 - 8 Channel Constant Current LED Driver
  • BCT3299 - 16 channel 256 level brightness LED Drivers

Full PDF Text Transcription

Click to expand full text
September , 2009, REV1.0 BCT3222 preliminary 6 Channel LED Driver (Common-Anode & Common-Cathode) Low Dropout Current Source & Current Sink General Description The BCT3222 is a high performance white LED driver. The BCT3222 uses an internal resistor to set the bias current for four LEDs, which are matched to +/-1.5%. The BCT3222's advantages over ballast resistors include much lower bias variation with supply voltage variation, significantly lower dropout voltage, and in some applications, significantly improved efficiency. The BCT3222 requires only a 50mV dropout voltage at a 20mA load on each output to match the LED brightness. By using one SEL pin, the BCT3222 can support to drive 6 parallel Co-Anode or Co-Cathode white LEDs and regulates a constant current for uniform intensity.
Published: |