Datasheet4U Logo Datasheet4U.com

ACNW3410 - 3 Amp Output Current IGBT Gate Drive Optocoupler

Description

The Broadcom® ACNW3410 contains an LED, which is optically coupled to an integrated circuit with a power output stage.

This optocoupler is ideally suited for driving IGBTs and power MOSFETs used in motor control inverter applications.

Features

  • 3.0 A maximum peak output current.
  • Rail-to-rail output voltage.
  • UVLO with VE reference for negative power supply.
  • 150 ns maximum propagation delay.
  • 90 ns maximum propagation delay difference.
  • LED current input with hysteresis.
  • 100 kV/µs minimum Common Mode Rejection (CMR) at VCM = 1500V.
  • ICC = 5.0 mA maximum supply current.
  • Under Voltage Lock-Out Protection (UVLO) with Hysteresis.
  • Wide Operating VCC Range: 15V to 30V.
  • Industrial Temperature.

📥 Download Datasheet

Datasheet Details

Part number ACNW3410
Manufacturer Broadcom
File Size 1.14 MB
Description 3 Amp Output Current IGBT Gate Drive Optocoupler
Datasheet download datasheet ACNW3410 Datasheet

📁 Similar Datasheet

  • ACNW3410 - 3 Amp Output Current IGBT Gate Drive Optocoupler (AVAGO)
  • ACNW3130 - Very High CMR 2.5 Amp Output Current IGBT Gate Driver Optocoupler (AVAGO)
  • ACNW3190 - 5.0 Amp High Output Current IGBT Gate Drive Optocoupler (AVAGO)
  • ACNW261L - Ultra Low Power 10 MBd Digital CMOS Optocoupler (AVAGO)
  • ACNH3112 - HIGH LOAD RELAY (Panasonic)
  • ACNH3212 - HIGH LOAD RELAY (Panasonic)
  • ACNM1112 - MIDDLE LOAD RELAY (Panasonic)
  • ACNM3112 - MIDDLE LOAD RELAY (Panasonic)
  • ACNM5112 - MIDDLE LOAD RELAY (Panasonic)
  • ACNM7112 - MIDDLE LOAD RELAY (Panasonic)
Other Datasheets by Broadcom
  • ACNT-H313 - 2.5A Output Current IGBT Gate Drive Optocoupler
  • ACNT-H343 - 5-Amp Gate Drive Optocoupler
  • ACNT-H50L - 1-MBd Optocoupler
  • ACNT-H790 - Optical Isolation Amplifier
  • ACNT-H79A - Optical Isolation Amplifier
  • ACNT-H79B - Optical Isolation Amplifier
  • ACNT-H870 - Precision Optically Isolated Voltage Sensor
  • ACNT-H87A - Precision Optically Isolated Voltage Sensor

Full PDF Text Transcription

Click to expand full text
ACNW3410 3 Amp Output Current IGBT Gate Drive Optocoupler with 100 kV/µs Noise Immunity Data Sheet Description The Broadcom® ACNW3410 contains an LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving IGBTs and power MOSFETs used in motor control inverter applications. The 100 kV/µs noise immunity prevent erroneous drive in noisy industrial environment. The voltage and high peak output current supplied by this optocoupler make it ideally suited for driving IGBT directly. The ACNW3410 has the highest insulation voltage of VIORM = 1414 Vpeak in the IEC/ EN/DIN EN 60747-5-5.
Published: |