ACPL-M50L Datasheet | Broadcom

ACPL-M50L, ACPL-054L, ACPL-W50L, ACPL-K54L Low Power, 1 MBd Digital Optocoupler Data Sheet Description The Broad® ACPL-M50L (single-channel in SO-5 footprint), ACPL-054L (dual-channel in SO-8 footprint), ACPL-W50L (single-channel in stretched SO-6 footprint), and ACPL-K54L (dual-channel in stretched SO-8 footprint) are low power, low-input current, 1-MBd digital optocouplers. These digital optocouplers use an insulating layer between the light-emitting diode and an integrated photon detector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output transistor collector increase the speed up to a hundred times over that of a conventional photo-transistor coupler by reducing the base-collector capacitance. The ACPL-M50L/054L/W50L/K54L has an increased mon mode transient immunity of 15 k V/µs minimum at VCM = 1500V over a temperature range of - 40°C to +105°C. The current transfer ratio (CTR) is 140% typical for ACPL-M50L or 130% typical for ACPL-054L/W50L/K54L at IF = 3 m A. This digital optocoupler can be used in any TTL/CMOS, TTL/LSTTL, or wide bandwidth analog applications. CAUTION! Take normal static precautions in handling and assembly of this ponent to prevent damage and/or degradation that might be induced by electrostatic discharge (ESD). The ponents featured in this data sheet are not to be used in military or aerospace applications or environments Features - Wide supply voltage VCC: 2.7V to 24V - Low drive current: 3 m A - Open-collector output - TTL patible - pact SO-5, SO-8, stretched SO-6, and stretched SO-8 package - 15 k V/µs high mon-mode rejection at VCM = 1500V - Guaranteed performance from temperature range: - 40°C to +105°C - Low propagation delay: 1 µs max at 5V - Worldwide safety approval: - UL1577 recognized, 3750 Vrms/1 min for ACPLM50L/054L, 5000 Vrms/1 min for ACPL-W50L/K54L - CSA Approval - IEC/EN/DIN EN 60747-5-5 Approval for Reinforced Insulation Applications -...