DP7411 Datasheet Dual Digital Potentiometers

Manufacturer: COPAL ELECTRONICS

Datasheet Details

Part number	DP7411
Manufacturer	COPAL ELECTRONICS
File Size	178.76 KB
Description	Dual Digital Potentiometers
Download	DP7411 Download (PDF)

The DP7411 is two Digital Potentiometers (DPs) integrated with control logic and 16 bytes of NVRAM memory.

Each DP consists of a series of 63 resistive elements connected between two externally accessible end points.

The tap points between each resistive element are connected to the wiper outputs with CMOS switches.

DP7411 Dual Digital Potentiometers (DP) with 64 Taps and SPI.

Two linear-taper digital potentiometers 64 resistor taps per potentiometer End to end resistance 2.5k, 10k, 50k or 100k Potentiometer control and memory access via SPI interface: Mode (0, 0) and (1, 1) Low wiper resistance, typically 80 Nonvolatile memory storage for up to four wiper settings for each potentiometer Automatic recall of saved wiper settings at power up 2.5 to 6.0 volt operation Standby current less than 1µA 24-lead SOIC and 24-lead TSSOP Industrial temperature ranges.

Part Number	Description
DP7419	Dual Digital Potentiometers
DP7401	Quad Digital Potentiometer
DP7409	Quad Digital Potentiometer
DP7241	Quad Digital Potentiometer
DP7251	Quad Digital Potentiometer
DP7259	Quad Digital Potentiometer
DP7261	Dual Digital Potentiometers
DP7269	Dual Digital Potentiometers