CS1005U Datasheet | CUI

DESCRIPTION : CURRENT SENSOR FEATURES - open loop - unipolar - detects current direction - single channel date 09/03/2019 page 1 of 4 MODEL CS0305U rated current (If) (ARMS) +3 linearity range1 (Im) (APEAK) +6 CS0505U +5 +10 +10 +20 CS1505U +15 +30 CS2005U +20 +40 Notes: 1. Im is the maximum peak current for which the output voltage specifications are guaranteed, however the If RMS rating must not be exceeded. 2. All specifications measured at 25°C, Rl=10 kΩ, unless otherwise noted. 3. It is remended to add a 1 μF capacitor connected between the mon terminal 4 and the +5 V terminal 1 to avoid noise problems. SPECIFICATIONS parameter supply voltage (Vcc) max current consumption (Ic) output voltage (Vo) zero current offset voltage (Vr) output voltage linearity4 (ΔKo) response (tr) output voltage temperature characteristics zero current offset voltage characteristics hysteresis (Vh) conditions/description at +If after demagnetization at di/dt = If/μs at +If to zero current min 4.75 2.26 0.27 typ 5.00 2.30 0.30 7 max 5.25 25 2.34 0.33 ±0.5 ±0.1 ±1.5 8 primary over current for maximum 50 ms, no damage withstand voltage between coil and each terminal for 1 minute insulation resistance between coil and each terminal at 500 Vdc operating temperature storage temperature safety approvals UL 508 flammability rating UL94V-0 Ro HS yes Notes: 4. Deducting the value of hysteresis and offset voltage, calculated by (V/Vo)/(Ifx I-1)x100%. 10- If 2,000 500 -10 75 -30 90 units V m A V V % μs %/°C m V/°C m V A Vac MΩ °C °C cui. Additional Resources: Product Page | 3D Model | PCB Footprint CUI Inc │ SERIES: CSXX05U │ DESCRIPTION : CURRENT SENSOR date 09/03/2019 │ page 2 of 4 SOLDERABILITY parameter hand soldering conditions/description for maximum 3 seconds MECHANICAL parameter conditions/description dimensions 15 x 15 x 20 case material terminals PBT phosphor bronze with tin plating weight MECHANIC...