CYUSB3013
Overview
- Universal serial bus (USB) integration ❐ USB 3.1, Gen 1 and USB 2.0 peripherals compliant with USB 3.1 Specification Revision 1.0 (TID # 340800007) ❐ 5-Gbps SuperSpeed PHY compliant with USB 3.1 Gen 1 ❐ High-speed On-The-Go (HS-OTG) host and peripheral compliant with OTG Supplement Version 2.0 ❐ Thirty-two physical endpoints
- General Programmable Interface (GPIF™ II) ❐ Programmable 100-MHz GPIF II enables connectivity to a wide range of external devices ❐ 8-, 16-, 24-, and 32-bit data bus ❐ Up to16 configurable control signals
- Fully accessible 32-bit CPU ❐ ARM926EJ core with 200-MHz operation ❐ 512-KB or 256-KB embedded SRAM
- Additional connectivity to the following peripherals ❐ SPI master at up to 33 MHz ❐ UART support of up to 4 Mbps ❐ I2C master controller at 1 MHz ❐ I2S master (transmitter only) at sampling frequencies of 8 kHz, 16 kHz, 32 kHz, 44.1 kHz, 48 kHz, 96 kHz and 192 kHz
- Selectable clock input frequencies ❐ 19.2, 26, 38.4, and 52 MHz ❐ 19.2-MHz crystal input support
- Ultra low-power in core power-down mode ❐ Less than 60 µA with VBATT on and 20 µA with VBATT off
- Independent power domains for core and I/O ❐ Core operation at 1.2 V ❐ I2S, UART, and SPI operation at 1.8 to 3.3 V ❐ I2C operation at 1.2 V to 3.3 V
- Package options ❐ 121-ball, 10- × 10-mm, 0.8-mm pitch Pb-free ball grid array (BGA) ❐ See Table 24 for details on the seven FX3 variants
- EZ-USB® Software Development Kit (SDK) for code development of firmware and PC Applications ❐ Includes RTOS Framework (using ThreadX Version 5) ❐ Firmware examples covering all I/O modules ❐ Visual Studio host examples using C++ and C#
- SuperSpeed Explorer Board available for rapid prototyping ❐ Several accessory boards also available:
