S25FL256L - 3.0V FL-L Flash Memory

Cypress (now Infineon)

Datasheet Details

Part number	S25FL256L
Manufacturer	Cypress (now Infineon)
File Size	1.36 MB
Description	3.0V FL-L Flash Memory
Datasheet	S25FL256L Datasheet

General Description

The Cypress FL-L Family devices are Flash non-volatile memory products using: – Floating Gate technology – 65 nm process lithography The FL-L family connects to a host system via a Serial Peripheral Interface (SPI).

Traditional SPI single bit serial input and output (Single I/O or SIO) is supported as well as optional two bit (Dual I/O or DIO) and four bit wide Quad I/O (QIO) and Quad Peripheral Interface (QPI) commands.

In addition, there are Double Data Rate (DDR) read commands for QIO and QPI that transfer address and read data on both edges of the clock.

Overview

S25FL256L/S25FL128L 256Mbit (32Mbyte)/128Mbit (16Mbyte), 3.0 V FL-L Flash Memory.

Key Features

a Page Programming Buffer that allows up to 256-bytes to be programmed in one operation and provides individual 4KB sector, 32KB half block, 64KB block, or entire chip erase. By using FL-L family devices at the higher clock rates supported, with Quad commands, the instruction read transfer rate can ma.

📁 Similar Datasheet

Part Number	Description	Manufacturer
S25FL256L	FL-L flash	Infineon
S25FL256S	Flash Non-Volatile Memory CMOS 3.0 Volt Core	SPANSION
S25FL256S	256Mb (32MB) FL-S Flash	Infineon

More Datasheets from Cypress (now Infineon)

Part Number	Description
S25FL256S	3.0V SPI Flash Memory
S25FL216K	16-Mbit 3.0 V Serial Flash Memory
S25FL032P	32-Mbit 3.0 V Flash Memory
S25FL064L	64-Mbit (8-Mbyte) 3.0V FL-L SPI Flash Memory
S25FL064P	64-Mbit 3.0 V SPI Flash Memory
S25FL128L	3.0V FL-L Flash Memory
S25FL128S	3.0V SPI Flash Memory