CYK128K16MCCB
Features
- Wide voltage range: 2.70V- 3.30V
- Access Time: 55 ns, 70 ns
- Ultra-low active power
- Typical active current: 1m A @ f = 1 MHz
- Typical active current: 14 m A @ f = fmax (For 55-ns)
- Typical active current: 8 m A @ f = fmax (For 70-ns)
- Ultra low standby power
.. can be put into standby mode when deselected (CE HIGH or both BHE and BLE are HIGH). The input/output pins (I/O0 through I/O15) are placed in a high-impedance state when the chip is deselected (CE HIGH), or when the outputs are disabled (OE HIGH), or when both Byte High Enable and Byte Low Enable are disabled (BHE, BLE HIGH), or during a write operation (CE LOW and WE LOW). Writing to the device is acplished by asserting Chip Enable (CE LOW) and Write Enable (WE) input LOW. If Byte Low Enable (BLE) is LOW, then data from I/O pins (I/O0 through I/O7), is written into the location specified on the address pins (A0 through A17). If Byte High Enable (BHE) is LOW, then data from I/O pins (I/O8 through I/O15) is...
