900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Cypress Semiconductor Electronic Components Datasheet

CYWM6934 Datasheet

WirelessUSB Radio Module

No Preview Available !

PRELIMINARY
CYWM6934
WirelessUSB LS™ Radio Module
1.0 Features
• The CYWM6934 LS™ 2.4-GHz DSSS Radio SoC Module
includes radio (CYWUSB6934), antenna, and all external
components
• Complete Radio Module with PCB Trace Antenna
• Operates in the unlicensed Industrial, Scientific, and
Medical (ISM) band (2.4 GHz–2.483 GHz)
• –90-dBm receive sensitivity
www.DataSheet4UU.cpomto 0-dBm output power
• Range of up to 10 meters or more
• Data throughput of up to 62.5 kbits/sec
• SPI microcontroller interface (up to 2 MHz data rate)
• Operating voltage from 2.7V to 3.6V
• Small PCBA Design: 0.975” (24.38 mm) by 0.65” (16.25
mm) by 0.212” (5.3 mm) (L x W x H)
• FCC Modular Approval Grant to meet FCC Part 15, EN 300
328-1, EN 301 489-1, and Industry Canada RSS-210
standards
• An FCC Module Approval (MA) Grant provides customers
significant cost savings, by allowing customers to adopt the
CYWM6934 FCC ID into their own products
2.0 Functional Description
The CYWM6934 WirelessUSB LSRadio Module offers a
complete radio module solution for integration into existing or
new 2.4-GHz products.
The CYWM6934 is tested for functional operation and is
FCC/ETSI(EU)/Industry pre-certified. The module is supplied
with an integrated PCB trace antenna.
The CYWM6934 is available in a small PCBA design and can
be mounted horizontally to the device PCB via a 12-pin
header. The pin-out of the header is shown in Figure 5-1.
3.0 Applications
• PC Human Interface Devices (HID)
— Mice
— Keyboards
— Joysticks
• Peripheral Gaming Devices
— Game Controllers
— Console Keyboards
• General
— Presenter Tools
— Remote Controls
— Consumer Electronics
— Barcode Scanners
— POS Peripherals
— Toys
CYWM6934 Module
Vcc
Bypass capacitors
12-pin
2mm
header
Vcc
RFIN
RFOUT
10 WirelessUSB LS
CYWUSB6934 Silicon
2.0 pF
PCB Trace
Antenna
CYW USB6934
2.0 pF
3.3 nH
1.2 pF
2.2 nH 27 pF
13MHz
Crystal
Cypress Semiconductor Corporation • 198 Champion Court • San Jose, CA 95134 • 408-943-2600
Document 38-16012 Rev. *A
Revised October 10, 2006
[+] Feedback


Cypress Semiconductor Electronic Components Datasheet

CYWM6934 Datasheet

WirelessUSB Radio Module

No Preview Available !

PRELIMINARY
CYWM6934
3.1 Reference Documentation
For information on technical details of the WirelessUSB LS
2.4-GHz DSSS Radio SoC such as register settings, timing,
application interfaces, clocking, and power management, refer
to the data sheet of the CYWUSB6934 Radio SoC.
3.2 Applications Support
The CYWM6934 is available as a reference design, complete
with PCB layout files, schematics, and a bill of materials. The
CYWM6934 can be used with the CY3635 WirelessUSB N:1
sensor development kit, and the CY3632 WirelessUSB LS
development kit via a 1 x 14 adaptor board.
www.DataShee4t4.U0.com Module Certification Details
4.1 Eligibility Requirements for Regulatory Mod-
ule Approval
The CYWM6934 LSTM Radio Module is a device that transmits
and receives radio signals in accordance with the spectrum
regulations for the 2.4-GHz unlicensed frequency range.
Regional regulatory agency approval may be required to
operate CYWM6934 throughout the world.
Cypress Semiconductor Corporation has obtained regulatory
approvals for the CYWM6934 to be used in specific countries.
CYWM6934 was approved under the “Modular Approval (MA)
Grant”. This certification represents a significant cost savings
to the OEM.
The MA Grant provides that device manufacturers who incor-
porate CYWM6934 as tested and approved can be relieved
from having to perform the Radio Regulatory certification
portion of the respective agency certification.
The MA Grant is valid only in countries[1.] that recognize the
MA Grant certification process; the USA, Canada, Belgium,
Denmark, France, Finland, Germany, Italy, Netherlands,
Spain, Sweden, UK.
In order to be able to take advantage of Cypress’s modular
certification in an end product, the following must be ensured:
1.) Correct Application
2.) Correct Installation
3.) Correct labeling
4.1.1 Correct Application:
There are three types of application considered for wireless
modules and the LS has been verified to work with all three
application types at pre-certified power output levels.
However, other usages are possible with re-certification. The
application types are defined as follows
4.1.1.1 Fixed Application:
Module is in a permanent location and has atleast 2m
separation from the human body.
4.1.1.2 Mobile Application:
Module can be relocated and will have atleast 20cm
separation from the human body.
Note:
1. This list is as of march 2006. Please talk to your local Sales person for the
current list.
Document 38-16012 Rev. *A
4.1.1.3 Portable Application:
Module can be relocated and will have less than 20cm
separation from human body.
4.1.2 Correct Installation:
• Modules cannot be modified in any way
• Modules must be used only in the operating range specified
in the datasheets
• Modules cannot be co-located within 20cm of another inten-
tional radiator in the system
• Must guarantee that end user cannot easily change antenna
Note: Sidestepping these requirements is possible with
additional testing and/or recertification. However, modular
approval would no longer apply.
4.1.3 Correct Labeling:
If end device containing a WirelessUSB LS Module will be sold
or used in the USA, the enclosure of the product must display
a label with the following basic elements:
CYWM6934
Contains FCC ID: R8KUGWM1USHN33A
If end device containing a WirelessUSB LS Module will be sold
or used in Europe, the enclosure of the product must display
a label with the following basic elements:
CYWM6934
0122
If end device containing a WirelessUSB LS Module will be sold
or used in Canada, the enclosure of the product must display
a label with the following basic elements:
CYWM6934
This product contains Cypress WirelessUSB module
Canadian Cert No IC: 5125A-UGWM1US
As of March 2006, Japan does not recognize the “Modular
Approval” certification. Regulatory certification for Japan
(TELEC) must be acquired through typical approval proce-
dures. These approvals are the sole responsibility of the OEM.
Note:
Even with modular approval, the end device still has to be
tested for digital emissions compliance with all agencies as an
electronic device. The modular approval only eliminates the
need to test for compliance on RF transmissions.
Page 2 of 9
[+] Feedback


Part Number CYWM6934
Description WirelessUSB Radio Module
Maker Cypress Semiconductor
Total Page 9 Pages
PDF Download

CYWM6934 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 CYWM6934 WirelessUSB Radio Module
Cypress Semiconductor
2 CYWM6935 WirelessUSB Radio Module
Cypress Semiconductor
3 CYWM6935PAEC WirelessUSB Radio Module
Cypress Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy