FM24CL04B Datasheet | Cypress

4-Kbit (512 × 8) Serial (I2C) F-RAM 4-Kbit (512 × 8) Serial (I2C) F-RAM Features - 4-Kbit ferroelectric random access memory (F-RAM) logically organized as 512 × 8 - High-endurance 100 trillion (1014) read/writes - 151-year data retention (See Data Retention and Endurance on page 10) - No Delay™ writes - Advanced high-reliability ferroelectric process - Fast 2-wire Serial interface (I2C) - Up to 1-MHz frequency - Direct hardware replacement for serial (I2C) EEPROM - Supports legacy timings for 100 k Hz and 400 k Hz - Low power consumption - 100 A active current at 100 k Hz - 3 A (typ) standby current - Voltage operation: VDD = 2.7 V to 3.65 V - Industrial temperature: - 40 C to +85 C - 8-pin small outline integrated circuit (SOIC) package - Restriction of hazardous substances (Ro HS) pliant Functional Description The FM24CL04B is a 4-Kbit nonvolatile memory employing an advanced ferroelectric process. A ferroelectric random access memory or F-RAM is nonvolatile and performs reads and writes similar to a RAM. It provides reliable data retention for 151 years while eliminating the plexities, overhead, and system-level reliability problems caused by EEPROM and other nonvolatile memories. Unlike EEPROM, the FM24CL04B performs write operations at bus speed. No write delays are incurred. Data is written to the memory array immediately after each byte is successfully transferred to the device. The next bus cycle can mence without the need for data polling. In addition, the product offers substantial write endurance pared with other nonvolatile memories. Also, F-RAM exhibits much lower power during writes than EEPROM since write operations do not require an internally elevated power supply voltage for write circuits. The FM24CL04B is capable of supporting 1014 read/write cycles, or 100 million times more write cycles than EEPROM. These capabilities make the FM24CL04B ideal for nonvolatile memory applications, requiring frequent or rapid writes....