Datasheet4U Logo Datasheet4U.com

AP22908 - 1.5A SINGLE SLEW RATE CONTROLLED LOAD SWITCH

General Description

The AP22908 slew rate controlled load switch is a single P-channel MOSFET power switch designed for high-side load-switching applications.

The MOSFET has a typical low RDS(ON) of 28mΩ at 3.6V, allowing increased load current handling capacity with a low forward voltage drop.

Key Features

  • Wide Input Voltage Range: 1.08V to 3.6V.
  • Low On-Resistance:.
  • 69mΩ Typical @1.2V.
  • 41mΩ Typical @1.8V.
  • 33mΩ Typical @2.5V.
  • 28mΩ Typical @3.6V.
  • High DC Current Capability up to 1.5A.
  • Quick Discharging by Output Discharge Resistance.
  • Ultra-Low Quiescent Current 0.05µA.
  • Active-High Control Pin.
  • Minimum 0.9V VIH of ON.
  • ESD Protection:.
  • Human Body Model: 2kV.
  • Charged Device Model: 1kV.
  • Package:.
  • X1-WLB0909-4 with Backside.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP2201 RF ULDO REGULATOR BCD Semiconductor
AP2201 PFM Control Step-Up Switching Regulator Chipown
AP2202 RF ULDO REGULATOR BCD Semiconductor
AP2203 RF ULDO REGULATOR BCD Semiconductor
AP2204 WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR BCD Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AP22913 SINGLE SLEW RATE CONTROLLED LOAD SWITCH
AP22916 ULTRA-LOW LEAKAGE LOAD SWITCH
AP22966 5V DUAL CHANNEL PROGRAMMABLE LOAD SWITCH
AP2202 150mA RF ULDO REGULATOR
AP220309 4A LOAD SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AP22908 1.5A SINGLE SLEW RATE CONTROLLED LOAD SWITCH Description The AP22908 slew rate controlled load switch is a single P-channel MOSFET power switch designed for high-side load-switching applications. The MOSFET has a typical low RDS(ON) of 28mΩ at 3.6V, allowing increased load current handling capacity with a low forward voltage drop. The turn-on slew rate of the device is controlled internally to avoid inrush current. Pin Assignments (Top View) (Bottom View) The AP22908 load switch is designed to operate from 1.08V to 3.6V, making it ideal for 1.2V, 1.8V, 2.5V, 3.3V and 3.6V systems. The typical quiescent supply current is only 0.05µA. The AP22908 is available in the wafer level chip scale 4-pin, X1WLB0909-4 0.5mm pitch, U-WLB0909-4 0.5mm pitch, and standard SOT26 packages.