Datasheet4U Logo Datasheet4U.com

DIO5180 - 1.5A Flash LED Driver

General Description

DIO5180 is a Boost-architecture high power flash LED driver, ideally for smart phone camera modules or digital still camera modules.

Key Features

  • Dual Flash LED Outputs Drive Up to Total 1.5A or 0.75A per Channel Up to 90% Efficiency Integrated 2MHz Step-Up Converter 3V to 5V Operation Voltage Range Very Small Inductor: 1.0μH Independent Flash Mode Enable and Movie/Torch Mode Enable Pins Flash Mode or Movie/Torch Mode Dimming via PWM Control One Resistor Sets Flash Mode LED Current One Resistor Sets Movie/Torch Mode LED Current Integrated Thermal Regulation Control 10kHz to 200kHz PWM Dimming Frequency 600ms Flash Timer Control 330kΩ Pull.

📥 Download Datasheet

Datasheet Details

Part number DIO5180
Manufacturer DIOO MICROCIRCUITS
File Size 620.75 KB
Description 1.5A Flash LED Driver
Datasheet download datasheet DIO5180 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by DIOO MICROCIRCUITS

Part Number Description
DIO5151 700mA/1A Buck/Boost Charge Pump LED Driver
DIO5320 39V Step-Up LED Driver
DIO5508 1A Lithium Ion Battery Charger
DIO5508B 600mA Lithium Ion Battery Charger IC
DIO5661 37V Step-Up LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DIO5180 2MHz, 1.5A Flash LED Driver Rev 1.7 Features Dual Flash LED Outputs Drive Up to Total 1.5A or 0.75A per Channel Up to 90% Efficiency Integrated 2MHz Step-Up Converter 3V to 5V Operation Voltage Range Very Small Inductor: 1.0μH Independent Flash Mode Enable and Movie/Torch Mode Enable Pins Flash Mode or Movie/Torch Mode Dimming via PWM Control One Resistor Sets Flash Mode LED Current One Resistor Sets Movie/Torch Mode LED Current Integrated Thermal Regulation Control 10kHz to 200kHz PWM Dimming Frequency 600ms Flash Timer Control 330kΩ Pull-Down Resistor on ENM and ENF Pins LED Open or Short Protection Output Over-Voltage Protection Cycle-by-Cycle Inductor Current Limit 0.