Datasheet4U Logo Datasheet4U.com

DS2129 - LVD SCSI 27-Line Regulator

Description

The DS2129 is a triple-output voltage regulator for 27-line, low-voltage-differential (LVD) SCSI termination for SPI-2 and SPI-3 applications using LVD termination networks.

The device provides reference voltages and bias currents for LVD-termination resistor pi (π) networks.

Features

  • such as thermal shutdown and active current limiting.
  • 2.7V to 5.25V Operation.
  • Differential Fail-Safe Bias Features.
  • Fully Compliant with SPI-2 and SPI-3 DS2129.

📥 Download Datasheet

Datasheet Details

Part number DS2129
Manufacturer Dallas Semiconducotr
File Size 184.20 KB
Description LVD SCSI 27-Line Regulator
Datasheet download datasheet DS2129 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS212W SCHOTTKY BARRIER RECTIFIERS AiT Components
DS212W Surface Mount Schottky Barrier Rectifier Jingdao Microelectronics
DS212W Surface Mount Schottky Barrier Rectifier Rectron
DS212W Surface Mount Schottky Barrier Rectifier BLUE ROCKET ELECTRONICS
DS21054E 16K 1.8V I2C SERIAL EEPROM Microchip Technology

Other Datasheets by Dallas Semiconducotr

Part Number Description
DS2120 Ultra3 LVD SCSI Terminator
DS2108 Differential SCSI Switchable Terminator
DS2114 SCSI Terminator
DS2118M Ultra3 LVD/SE SCSI Terminator
DS2119M Ultra3 LVD/SE SCSI Terminator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Rev 1; 2/06 LVD SCSI 27-Line Regulator General Description The DS2129 is a triple-output voltage regulator for 27-line, low-voltage-differential (LVD) SCSI termination for SPI-2 and SPI-3 applications using LVD termination networks. The device provides reference voltages and bias currents for LVD-termination resistor pi (π) networks. With a pi network (475Ω , 121 Ω , 475 Ω ), the DS2129 meets the common-mode bias, differential bias, and termination-impedance requirements of SPI-2 (Ultra2) and SPI-3 (Ultra3). The device also provides a 1.3V output for DIFFSENSE signaling, and includes protection features such as thermal shutdown and active current limiting. ♦ 2.7V to 5.
Published: |