Datasheet4U Logo Datasheet4U.com

DS2188 - T1/CEPT Jitter Attenuator

Description

The DS2188 T1/CEPT Jitter Attenuator Chip contains a 128 X 2-bit buffer which, in conjunction with an external 4X crystal, is used to attenuate the incoming jitter present in clock and data.

Features

  • Attenuates clock and data jitter present in T1 or CEPT lines Meets the jitter attenuation templates outlined in TR62411, TR-TSY-000170, G.735, and G.742 Only one external component required; either a 6.176 MHz (T1) or 8.192 MHz (CEPT) crystal Selectable buffer size of 128 or 32 bits Jitter attenuation is easily disabled Single +5V supply; low-power CMOS technology Available in 16-pin DIP and 16-pin SOIC (DS2188S) Companion to the DS2186 Transmit Li.

📥 Download Datasheet

Datasheet preview – DS2188

Datasheet Details

Part number DS2188
Manufacturer Dallas Semiconducotr
File Size 149.51 KB
Description T1/CEPT Jitter Attenuator
Datasheet download datasheet DS2188 Datasheet
Additional preview pages of the DS2188 datasheet.

📁 Similar Datasheet

  • DS2182A - T1-Line Monitor-Chip (Maxim Integrated)
  • DS21054E - 16K 1.8V I2C SERIAL EEPROM (Microchip Technology)
  • DS2106SY - Rectifier Diode (Dynex Semiconductor)
  • DS2107SY - Rectifier Diode (Dynex Semiconductor)
  • DS210W - SCHOTTKY BARRIER RECTIFIERS (AiT Components)
  • DS210W - Surface Mount Schottky Barrier Rectifier (Jingdao Microelectronics)
  • DS210W - Surface Mount Schottky Barrier Rectifier (Rectron)
  • DS210W - Surface Mount Schottky Barrier Rectifier (BLUE ROCKET ELECTRONICS)
  • DS2110 - Plug and Play SCSI Terminator (Dallas Semiconductor)
  • DS2117M - Ultra3 LVD/SE SCSI Terminator (Dallas Semiconductor)
Other Datasheets by Dallas Semiconducotr
  • DS2180A - T1 Transceiver
  • DS2181A - CEPT Primary Rate Transceiver
  • DS2182A - T1 Line Monitor
  • DS2186 - Transmit Line Interface
  • DS2187 - Receive Line Interface
  • DS2108 - Differential SCSI Switchable Terminator
  • DS2114 - SCSI Terminator
  • DS2118M - Ultra3 LVD/SE SCSI Terminator

Full PDF Text Transcription

Click to expand full text
DS2188 T1/CEPT Jitter Attenuator www.dalsemi.com FEATURES § § § § § § § § Attenuates clock and data jitter present in T1 or CEPT lines Meets the jitter attenuation templates outlined in TR62411, TR-TSY-000170, G.735, and G.742 Only one external component required; either a 6.176 MHz (T1) or 8.
Published: |