Datasheet4U Logo Datasheet4U.com

NC12S0A0V20 - DC/DC Power Modul

Description

The ENABLE (on/off) input allows external circuitry to put the NC converter into a low power dissipation (sleep) mode.

Positive (active-high) ENABLE is available as standard.

Positive ENABLE (active-high) units of the NC series are turned on if the ENABLE pin is high or floating.

Features

  • High Efficiency: 91% @ 12Vin, 5V/20A out Size: 30.5x27.9x11.4mm (1.20”×1.10”×0.45”) -- Vertical 30.5x27.9x12.9mm (1.20”×1.10”×0.51”) -- Horizontal Voltage and resistor-based trim No minimum load required Output voltage programmable from 0.9Vdc to 5.0Vdc via external resistors Fixed frequency operation Input UVLO, output OCP, SCP Power good output signal Remote ON/OFF (default: positive) ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada).

📥 Download Datasheet

Datasheet preview – NC12S0A0V20

Datasheet Details

Part number NC12S0A0V20
Manufacturer Delta Electronics
File Size 865.46 KB
Description DC/DC Power Modul
Datasheet download datasheet NC12S0A0V20 Datasheet
Additional preview pages of the NC12S0A0V20 datasheet.

📁 Similar Datasheet

  • NC101 - Noise Diodes (Wireless Telecom)
  • NC101 - (NC100 Series) 0.1 HZ - 500 KHZ Noise Diode (Noise Com)
  • NC102 - Noise Diodes (Wireless Telecom)
  • NC102 - (NC100 Series) 0.1 HZ - 500 KHZ Noise Diode (Noise Com)
  • NC103 - Noise Diodes (Wireless Telecom)
  • NC103 - (NC100 Series) 0.1 HZ - 500 KHZ Noise Diode (Noise Com)
  • NC104 - Noise Diodes (Wireless Telecom)
  • NC104 - (NC100 Series) 0.1 HZ - 500 KHZ Noise Diode (Noise Com)
  • NC15 - 1.5 X 5mm / 2 X 6mm / 3 X 8mm Thru-hole (Fox Electronics)
  • NC1602L - Display (Newtec)
Other Datasheets by Delta Electronics

Full PDF Text Transcription

Click to expand full text
FEATURES High Efficiency: 91% @ 12Vin, 5V/20A out Size: 30.5x27.9x11.4mm (1.20”×1.10”×0.45”) -- Vertical 30.5x27.9x12.9mm (1.20”×1.10”×0.51”) -- Horizontal Voltage and resistor-based trim No minimum load required Output voltage programmable from 0.9Vdc to 5.0Vdc via external resistors Fixed frequency operation Input UVLO, output OCP, SCP Power good output signal Remote ON/OFF (default: positive) ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV (EN60950) Certified Delphi NC20 Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V-5.0Vout, 20A www.DataSheet4U.
Published: |