AP91352 Datasheet SAS DISABLE +5V eFUSE

Manufacturer: Diodes Incorporated

AP91352 sas disable +5v efuse by Diodes Incorporated - Datasheet Preview

Datasheet Details

Part number	AP91352
Manufacturer	Diodes Incorporated
File Size	847.82 KB
Description	SAS DISABLE +5V eFUSE
Datasheet	AP91352 Datasheet

General Description

The eFuse is a 5V protection device with a bidirectional switch that incorporates input slew rate control to reduce input surge current and reverse current detection to prevent discharge to VCC from VOUT.

The eFuse protection

Overview

NEW PRODUCT GND AP91352 SAS DISABLE +5V eFUSE WITH INTEGRATED.

Key Features

include under voltage lockout, a fixed 2.5A current limit, trimmed fast response over voltage protection and thermal shutdown. The EN/FAULT line is a tri-state bidirectional interface that can be used to disable the output by pulling the line low through an external open drain device. If a thermal fault occurs, the voltage on the pin will go to an intermediate voltage indicating a fault and it can be connected to another device to cause simultaneous shut down. The SAS pin is an ESD protected int.

More Datasheets from Diodes Incorporated

Part Number	Description
AP9101C	SINGLE CHIP SOLUTION FOR 1-CELL Li+ BATTERY PACK
AP9211	SINGLE CHIP SOLUTION
AP9214L	SINGLE CHIP SOLUTION
AP9234L	HIGH ACCURACY SINGLE CHIP SOLUTION