Datasheet4U Logo Datasheet4U.com

ZXLD1356Q - AUTOMOTIVE GRADE 60V 550mA LED DRIVER

Description

The ZXLD1356Q is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage.

Features

  • Typically Better than 0.8% Output Current Accuracy.
  • Simple with Low Part Count.
  • Single Pin On/Off and Bright.

📥 Download Datasheet

📁 Similar Datasheet

  • ZXLD1356 - 60V 550mA LED DRIVER and AUTOMOTIVE GRADE (Zetex Semiconductors)
  • ZXLD1350 - 350mA LED driver (Zetex Semiconductors)
  • ZXLD1352 - 350mA LED driver (Zetex Semiconductors)
  • ZXLD1320 - Buck mode DC-DC converter (Zetex Semiconductors)
  • ZXLD1321 - Buck mode DC-DC converter (Zetex Semiconductors)
  • ZXLD1322 - Buck/boost mode DC-DC converter (Zetex Semiconductors)
  • ZXLD1360 - 1A LED driver (Zetex Semiconductors)
  • ZXLD1362 - 1A LED driver (Zetex Semiconductors)
  • ZXLD1374 - 60V HIGH ACCURACY 1.5A BUCK/BOOST/BUCK-BOOST LED DRIVER CONVERTER (Zetex Semiconductors)
  • ZXLD1100 - ADJUSTABLE LED DRIVER (Zetex)
Other Datasheets by Diodes

Full PDF Text Transcription

Click to expand full text
ZXLD1356Q AUTOMOTIVE GRADE 60V 550mA LEDQDRIVER Description The ZXLD1356Q is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 6V and 60V and provides an externally adjustable output current of up to 550mA. Depending upon supply voltage and external components, this can provide up to 30 watts of output power. Output current can be adjusted above, or below the set value, by applying an external control signal to the ADJ pin. Enhanced output current dimming can be achieved by applying a Pulse Width Modulated (PWM) signal to the ADJ pin.
Published: |