Datasheet4U Logo Datasheet4U.com

LM3842 - step-down constant current LED driver

General Description

The LM3842 is a step-down constant current LED driver.

When the input voltage down to lower than LED forward voltage, then LM3842 run into LDO mode.

Key Features

  • n n n n n n n n n n n n Efficiency up to 93% 180 μA(TYP. ) Quiescent Current Output Current: Up to 1A Internal Synchronous Rectifier 1.5MHz Switching Frequency Soft Start Under-Voltage Lockout Short LED Protection Open LED Protection Thermal Shutdown 5-pin Small SOT23-5 Packages Pb-Free Package General.

📥 Download Datasheet

Datasheet Details

Part number LM3842
Manufacturer Unknown Manufacturer
File Size 367.53 KB
Description step-down constant current LED driver
Datasheet download datasheet LM3842 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM3842A CURRENT MODE PWM CONTROLLER HTC
LM384 5W Audio Power Amplifier National Semiconductor
LM384 5W Audio Power Amplifier Texas Instruments
LM3843A CURRENT MODE PWM CONTROLLER HTC
LM3844A CURRENT MODE PWM CONTROLLER HTC

Other Datasheets by Unknown Manufacturer

Part Number Description
LM30-3015PC Sensors
LM3216 P-MOS
LM378 4W Audio Amplifier
LM3940 Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM3842 Features n n n n n n n n n n n n Efficiency up to 93% 180 μA(TYP.) Quiescent Current Output Current: Up to 1A Internal Synchronous Rectifier 1.5MHz Switching Frequency Soft Start Under-Voltage Lockout Short LED Protection Open LED Protection Thermal Shutdown 5-pin Small SOT23-5 Packages Pb-Free Package General Description The LM3842 is a step-down constant current LED driver. When the input voltage down to lower than LED forward voltage, then LM3842 run into LDO mode. The LM3842 supports a range of input voltages from 2.5V to 6.0V, allowing the use of a single Li+/Li-polymer cell, 3AA or 4AA cell, USB, and other standard power sources. The FB voltage is only 0.1V to achieve high efficiency.